Menu
Your Cart

32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz

32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
Only a few units in stock Clearance -35 %
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz
61.99€
39.99€
Tax 33.05€
  • Stock: 1
  • Model: Spider-Fysetc-X-Voron

Version:

2.3

2.3

3

3

Pay in three interest-free installments with PayPal. 0% APR.

Spider Board is a small but powerful 3D printer control board. In a limited space, it integrates 8 stepper motor drives, 5A 12V power supply, 8A 5V power supply, which provides powerful energy for fans of various voltages, various RGB light strips and Raspberry Pi. You can build a 3D printer with rich functions through SPIDER. Especially for VORON V2.4, designed cooperating with the VORON team in the early stage of design, and many features have been recognized by the VORON team. If you are building VORON, this will be your best choice.


Current Version: 2.3


Features:

  • Compact size: 155.3mm x 76.5mm
  • Based on STM32F446 180Mhz,all IOs can withstand 5V voltage
  • 8 TMC stepper drivers support, with Uart&SPI support
  • Improved TMC jumper settings again,simpler and easier
  • 28V input max,12V@5A DC-DC,5V@8A DC-DC (Especially for Raspberry Pi),[email protected] LDO
  • Two car fuses for hot bed input and main power input
  • Limit switch socket 24V/5V/3.3V optional, ready for more other equipment, such as -inductive sensor, BL-Touch
  • XH2.54 connectors
  • 10x PWM capable power mosfet outputs (1 for HotBed, 3 for Hot-End, 3 for fans, 3 for RGB LED strip)
  • 3pin temperature header, you can use thermistor or thermocouple (requires AD597 module)
  • Up to 8 ways PWM fans (only use 1 extrueder and no 12V/24V RGB used ),2 ways RGB led(12V & 24V optional) ,1 way 5V-RGB led (NEO-PIXEL/WS2812)
  • RepRapDiscount SmartController compatible pin header on board
  • UART1-Raspberry Pi pin header (including 5V@8A power supply)
  • 2X4 PinHeader Out for SD Card moudle
  • Onboard micro-SD card
  • Type-C and Type-B USB connector optional
  • EXP1 & EXP2 have more multiplexing functions, such as USART, I2C, CAN
  • SD card & USB upload support
  • A 4.7kOhm 0.1% temperature sensor pull up resistor is used, PT1000 can be connected directly. For PT100, an amplifier board must be used.

Version 2.3 upgrades:

  • Change 12V-24V RGB port layout to 3 fan ports, which can be used as a fan port more conveniently and still maintain RGB output support
  • Optimize the fan control circuit, upgrade the buffer chip to independent triode control, enhance stability and greatly improve safety performance
  • All motor drive module interface communication networks add high voltage buffering and voltage clamping processing, adding a shield to the MCU
  • Re-layout the PCB, connectors position changed

More info:

100% Customers recommend this product

  • 5 Awesome
    100%
  • 4 Great
    0%
  • 3 Average
    0%
  • 2 Bad
    0%
  • 1 Poor
    0%
Please login or register to review

Reviews Over 32 bit Spider V2.3 board - for Voron - STM32F446 180Mhz

  • (5)

Total Reviews (1)
click here write review to add review for this product.



Check out this bundle
Pack consisting of the Spider board, 4 TMC2209 controllers and a mini 12864 graphics display. This configuration can be used in printers like the Voro..