Menu
Your Cart

ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer

ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
New -33 %
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer
Personalized Product
This product is prepared according to the customer requirements, thus, the handling time is between 24 and 72 hours approximately.
95.00€
63.50€
Tax 52.48€
  • Stock: In Stock
  • Model: PrintedParts-Voron0.1

Model:

VORON 0.1

VORON 0.1

VORON Trident

VORON Trident

VORON 2.4

VORON 2.4

Available Options

Parts are printed after the order.


Printed parts for the Voron 0.1 Printer, developed by the team at VORON Design.

Parts are printed in ABS as recommended by the community.

This kit includes as a base the essential parts the assembly, and as extras, the various options available.

Parts list:

  • [a] 9mm Spacer x6
  • [a] A Drive Tensioner x1
  • [a] B Drive Tensioner x1
  • [a] Cable Tie x1
  • [a] Foot Rear Left x1
  • [a] Foot Rear Right x1
  • [a] Railstop x6
  • [a] Tensioner Knob x2
  • [a] Thumb Nut x3
  • [a] X Endstop Bumper x1
  • [a] X Endstop Mount x1
  • [a] Z Motor Mount x1
  • A Drive Frame Lower x1
  • A Drive Frame Upper x1
  • A Idler Lower x1
  • A idler Upper x1
  • B Drive Frame Lower x1
  • B Drive Frame Upper x1
  • B Idler Lower x1
  • B idler Upper x1
  • Front Bed Mount x1
  • M2 Nut Adaptar Rotated x5
  • MGN7 Rail Guide x2
  • Power Inlet x1
  • PSU Cover x1
  • Raspberry Pi 3b Mount x1
  • Rear Bed Mount Left x1
  • Rear Bed Mount Right x1
  • Skirt mirror x3
  • Skirt x3
  • Skr E3 Mounting bracket x1
  • Spool Holder V0 x1
  • T8 Nut Block 12mmx22mmOD x1
  • T8 Nut Block 18mmx24mmOD x1
  • X Carriage 90 x1
  • XY Joint Left Lower x1
  • XY Joint Left Upper x1
  • XY Joint Right Lower x1
  • [a] Mid Body x1
  • Cowling LOGO ONLY x1
  • Guidler DD x1
  • Latch DD x1
  • Latch Shuttle DD x1
  • Motor Frame x1
  • Strain Relief Body x1
  • Straing Relief Spacers x2

The pieces that include the different options are:

The Hotend option includes:

Miniafterburner:

  • [a] Mid Body x1
  • Cowling LOGO ONLY x1
  • Guidler DD x1
  • Latch DD x1
  • Latch Shuttle DD x1
  • Motor Frame x1
  • Strain Relief Body x1
  • Straing Relief Spacers x2
  • Cowling* x1
    *Para Dragon, BMO o Mosquito, según selección

-Bowden:

  • [a] Endstop strike block x1
  • [a] Toolheadblower duct left* x1
  • [a] Toolheadblower duct right* x1
  • Toolhead left* x1
  • Toolhead right* x1
    *Para Dragon, Mosquito o V6, según selección

The Panel Mount option includes:

  • Door Handle x1
  • Door Latch x2
  • Bottom Corner Front* x1
  • Bottom Corner Rear Mirror* x1
  • Bottom Corner Side Mirror* x1
  • Bottom Corner Side* x2
  • Hinge Bottom A* x1
  • Hinge Bottom B* x1
  • Hinge Top A* x1
  • Hinge Top B* x1
  • Middle Clip* x9
  • Top Corner Front* x1
  • Top Corner Rear Mirror* x1
  • Top Corner Rear* x1
  • Top Corner Side mirror* x1
  • Top Corner Side* x2 

*dependiendo de elección para 2, 2.5, 3mm.

The Tools option includes:

  • BMG Shaft Mod Spacer x1
  • T-nut Mod Tool x1
  • V0 Extrusion Drilling Guide x1

The Tophat option includes:

  • Front and Rear Midclip x2
  • Left and Right Midclip x2
  • Lower Corner 1 and 3 Clip x2
  • Lower Corner 2 and 4 Clip x2
  • Tophat Part 1 x1
  • Tophat Part 2 x2
  • Tophat Part 3 x1
  • Upper Corner 1 and 3 Clip x2
  • Upper Corner 2 and 4 Clip x2

By default the pieces will be printed in Black, the Accent or accent [a] pieces in Red. If you want them in another color, please contact us before the order.

We will have in Stock 2-3 units in black and red prepared, if we have to print them the processing time will be 1 to 2 weeks.

100% Customers recommend this product

  • 5 Awesome
    100%
  • 4 Great
    0%
  • 3 Average
    0%
  • 2 Bad
    0%
  • 1 Poor
    0%
Please login or register to review

Reviews Over ABS Printed Parts for Voron 0.1 CoreXY DIY 3D Printer

  • (5)

Total Reviews (1)
click here write review to add review for this product.