This hotend is a simple solution to print parts in two colors or different materials without the characteristic problems of the dual nozzles, such as stains and lags in printing. All material is extruded by the same nozzle, so there are no lags and calibration is simpler and more stable.
The Gcode must be programmed so that the retraction the two filament is always greater than 34mm, since internally the filament channels form a Y, it is important that the materials does not collide at the intersection.
- 1x 0.4mm nozzle
- 1x Heating block
- 1x Silicone Sock
- 1x Throat
- 1x Heatsink with bowden connectors
- 1x Fan 3010 12 / 24v
- 1x 12 / 24v heating cartridge
- 1x Encapsulated Thermistor