Hot Sales -6 %
Calibrated smooth rod diameter 10mm - Cut to size
2.40€
2.25€
Tax 1.86€
- Stock: In Stock
- Model: Rod-D10
Diameter:
Diameter 8mm
Diameter 10mm
Diameter 12mm
Calibrated smooth rod diameter 10mm - Cut to size
Please do not forget to fill in this field, the units are in millimeters, so if you want 32cm you have to indicate 320mm, for 0,5m you have to indicate 500mm.
If you do not fill in this field our team will cut it in the highest value within the stretch.
If you select a value outside the selected section, they will be cut to the value closest to the number selected within the section. For example, if it indicates 70mm, they will be cut to 100 because we cannot cut shorter rods.
If you need a special length or have any questions please do not hesitate to contact us: info@hta3d.com
Hot Sales -73 %
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-a..
0.99€ 0.27€ Ex Tax:0.22€
Hot Sales -67 %
Belt GT2 for reprap, made of neoprene with reinforcerd fiberglass. Dimensions: Width: 6mm Step: 2mm Belt heigh: 1.38 mm Teeth..
2.99€ 1.00€ Ex Tax:0.83€
-71 %
Fan Specifications 6010 Size: 60x10mm 11 Blades Connector: XH2.54-2P Nominal current: 0.16 ± 10% Amp Rated Voltage: DC12..
5.45€ 1.59€ Ex Tax:1.31€
Hot Sales -75 %
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink in..
8.99€ 2.25€ Ex Tax:1.86€
Hot Sales -84 %
Mechanical EndStop with cable and 3-pin connector.Cable length: 70cm 1 Piece..
2.99€ 0.49€ Ex Tax:0.41€
-35 %
Composition: 2x 375mm Smooth rod 2x 350mm Smooth rod (2.01 compatible) 2x 320mm Sm..
25.99€ 17.00€ Ex Tax:14.05€
-24 %
Composition: 2x 380mm M10 threaded rod 4x 210mm M10 threaded rod 2x 3..
28.99€ 22.00€ Ex Tax:18.18€
-31 %
Composition: M8 Smooth stainless steel rods: 2x 370mm: X Axis 2x 400mm:&nb..
26.99€ 18.50€ Ex Tax:15.29€
-17 %
Composition: 2x 492mm M8 threaded rod 4x 180mm M8 threaded rod 2x..
29.99€ 25.00€ Ex Tax:20.66€
Hot Sales -45 %
Are used in reprap printers for the linear movement using smoth ribs of 10mm. Nominal dimensions: Outside diameter: 19mm Inside d..
1.50€ 0.82€ Ex Tax:0.68€
-50 %
Precision motor T8x8 trapezoidal screw integral with the shaft. By eliminating the need for flexible couplings problems of shaft misalignment are el..
44.99€ 22.50€ Ex Tax:18.60€
Hot Sales -76 %
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32..
15.00€ 3.59€ Ex Tax:2.97€
Hot Sales -8 %
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never ..
1.90€ 1.75€ Ex Tax:1.45€
Hot Sales -83 %
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions:&..
6.00€ 0.99€ Ex Tax:0.82€
Material: Zinc-plated steel Precision cutting: cutting is done by hand, so mesure may be slightly higher, but will never be less than indicated.&..
1.39€ Ex Tax:1.15€
-68 %
Hobbed Bolt for 3D printer, based on Reprap community design: http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt M8 x 60mm knu..
8.99€ 2.85€ Ex Tax:2.36€
-37 %
KIT P3STEEL PRINTED PARTS Components: -Extruder: Body, ildler and budas adaptor &n..
24.00€ 15.00€ Ex Tax:12.40€
-35 %
ITOPIE PRINTED PARTS KIT Basado en: http://reprap.org/wiki/ITopie Components: -Extruder (3mm/ 1.75mm) -Extruder..
24.00€ 15.50€ Ex Tax:12.81€
-29 %
KIT PRUSA I3 ABS PRINTED PARTS - BOXED STYLE FRAME Based on: http://78.47.92.212/i3_documentation_pics/singlepage..
34.00€ 24.00€ Ex Tax:19.83€
-19 %
PRUSA I3 PRINTED PARTS KIT Based on: http://reprap.org/wiki/Prusa_i3 In this selecion of parts we try to keep..
25.99€ 20.99€ Ex Tax:17.35€