We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

Heated Bed


Show:
Sort By:
ALU Heatbed MK3 -48%

ALU Heatbed MK3

All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recom..

25.99€ 13.50€ Ex Tax: 11.16€

ALU Heatbed MK3 300x200 12v

All features similar to MK2 12 Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal InsulatorDual ..

49.99€ Ex Tax: 41.31€

Borosilicate tempered glass 213x200x3mm -38%

Borosilicate tempered glass 213x200x3mm

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it i..

12.99€ 7.99€ Ex Tax: 6.60€

Borosilicate tempered glass 300x200x3mm -29% Out of Stock

Borosilicate tempered glass 300x200x3mm

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it i..

16.99€ 11.99€ Ex Tax: 9.91€

MK2A Heatbed 300x200mm -9%

MK2A Heatbed 300x200mm

MK2b Heated Bed 300x200mm The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing. Thus the warping (parts bulge and come off during printing process) is avoided.  More information: http://reprap.org/wiki/PCB_..

32.99€ 29.99€ Ex Tax: 24.79€

MK2B HeatBed 200x200mm 12v / 24v - Red or black -50%

MK2B HeatBed 200x200mm 12v / 24v - Red or black

The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing.Thus the warping (parts bulge and come off during printing process) is avoided.More information:http://reprap.org/wiki/PCB_Heatbed..

17.99€ 8.95€ Ex Tax: 7.40€

MK2B SB -28%

MK2B SB

MK2b SB 12/24v Cama caliente en Negro MK2B heated bed in black with welds for thermistor (included). The function of the heated bed is to avoid warping of plastic parts during printing. This is the black MK2B version with just the amount of copper necessary to provide a ..

19.99€ 14.49€ Ex Tax: 11.98€

Thermal Insulation for Heated Bed -20%

Thermal Insulation for Heated Bed

Thermal Insulation for Heated Bed 1 Piece..

2.50€ 1.99€ Ex Tax: 1.64€

Thermistor 100K ohm NTC 3950 wired -50%

Thermistor 100K ohm NTC 3950 wired

Thermistor ideal for the Heated Bed or Hotend. 100K ohm NTC 3950 1m wire A Dupont  cable de 1 pin female included 1 Piece..

3.20€ 1.59€ Ex Tax: 1.31€