Dual v6 Throat - Threat M6 & 7mm diameter - PTFE ready - All Metal
3.99€
Tax 3.30€
- Stock: 56
- Model: Dual-All-Metal-Throat
Model:
ID: 4.1
All Metal
Bimetal
Titanium
Bimetal - high quality
Dual v6 Throat - Threat M6 & 7mm diameter - PTFE ready - All Metal
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
0.39€
Ex Tax:0.32€
The V6 Heater Block has been upgraded to clamp both the
heater cartridge and thermistor in place. These design improvements
improve the thermal..
0.60€
Ex Tax:0.50€
-3 %
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
29.99€ 28.99€
Ex Tax:23.96€
-69 %
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
84.70€ 26.50€
Ex Tax:21.90€
It is commonly used to increase performance in Hotends All metal , is applied between the throat and the heat sink. Pre - applied in our hotend V..
0.25€
Ex Tax:0.21€
Compatible with 1.75mm filament
Material: Stainless Steel This model allows the teflon tube reach the nozzle
This configura..
3.99€
Ex Tax:3.30€
V6 bimetal throat, with M6 and M7 thread.Throat made of titanium and copper, two metals with different thermal conductivity to achieve better performa..
3.50€
Ex Tax:2.89€
V6 bimetal throat, with M6 and smooth 7mm diameter.Throat made of titanium and copper, two metals with different thermal conductivity to achieve bette..
3.50€
Ex Tax:2.89€
Recommended
Throat v6 Bimetal Heatbreak High quality - Thread M6 & 7mm diameter - Compatible with v6 - All metal
High quality bimetal throat V6 compatible.This throat stands out for its high quality and good performance thanks to its precise manufacture with two ..
15.35€
Ex Tax:12.69€
Recommended
High quality bimetal throat V6 compatible.This throat stands out for its high quality and good performance thanks to its precise manufacture with two ..
15.75€
Ex Tax:13.02€
Related Posts
19 Jun
3
15786
Cool Pull or Atomic Method to clean the nozzle of our 3D Printer Cool Pull or Atomic Method is a technique to clean the nozzle. It can be done after a jam, or as a preventive cleaning after a change of material or many hours of printing. With the Atomic Method technique, we can extract residues and/or burnt particles of filament from the n..
14 Sep
0
10032
Our 3D printer, as every machine, needs a maintenance. One of the most basic ones is the change of the nozzle of our hotend. We may need to change it for several reasons, as for example, needing a smaller or bigger diameter (as bigger diameters are better for resistent parts with few details and fast printings and small diameters are better for sma..