Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced nylon.Screw material: steel.Diameter of the base: 50mmScrew: M8Screw length: 50 mm1 unit ..
2020 aluminum profile. It is commonly used in the structure of 3D printers.Open slots: 4Material: Anodized AluminumDimensions: 15x15Weight: 200g1 unit of 1 meter length...
2020 aluminum profile. It is commonly used in the structure of 3D printers.Open slots: 4Material: Anodized AluminumDimensions: 20x201 unit of 1 meter length...
Slotted aluminum profile kit for mounting a HyperCube Evolution, a popular 3D Core XY printer model. This model is completely open source and there are many variants, this combination is for a version of volume 30 x 30 x 30 cm approximately, the final print volume may vary depending on the moun..
Connector for European standard industrial aluminum profiles.Connect three profiles together and fasten them with screws, in a simple and discreet way.M4 orifices.Material: zinc alloyDimensions:..
Connector for European standard industrial aluminum profiles.Connect three profiles together and fasten them with screws, in a simple and discreet way.4x M6 setscrews included.Material: zinc alloyDimensions:..
Connector L shaped to reinforce the union of the corners in right angle joints of aluminum profiles.Nickel-plated surface for good resistance to oxidation and better performance.2020 is for 6mm.Two M5 setscrews are included.1 unit..
Connector L shaped to reinforce the union of the corners in right angle joints of aluminum profiles.Nickel-plated surface for good resistance to oxidation and better performance.3030 is for 8mm.Two M6 setscrews are included.1 unit..
Plate to fix 20 x 20 aluminum profiles, with "L" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
Plate to fix 20 x 20 aluminum profiles, with "T" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
3030 aluminum profile. It is commonly used in the structure of 3D printers.Open slots: 4Material: Anodized AluminumDimensions: 30x301 unit of 1 meter length...
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of the right angle corner.Specifications:Material: aluminum alloyColour: GreySize: approx. 2 x 2 x 1.7 cm approx.Elliptical hole: approx. 0.9 x 0.6 cm..