New
-20 %
Die Spring - 8x25 for M4 and M3
0.35€
0.28€
Tax 0.23€
- Stock: In Stock
- Model: ResorteTroquel-8x25
Model:
ID 4mm Cut To Size
M3 or M4 - 7.5x20
8x25 for M4 and M3
Die Spring - 8x25 for M4 and M3
-69 %
This is a tough thin plastic film that adheres to the printing base or hot bed.It is designed with a special material in which the printed pieces adhe..
10.00€ 3.15€
Ex Tax:2.60€
-25 %
This kit contains:4 M3x25 countersunk bolts4 self-locking M3 nuts4 M3 washers DIN 90214 springs 1cm..
2.00€ 1.50€
Ex Tax:1.24€
-47 %
Lubricating oil for maintenance of your 3D printer.Especially recommended for bearings.Material: OilType: LubricationSize: 10ml..
1.50€ 0.79€
Ex Tax:0.65€
Hot Sales
--22 %
This nut is used to facilitate manual leveling of the hot bed, since only the nut needs to be turned to tighten or loosen the screw.Specifications:Lar..
0.09€ 0.11€
Ex Tax:0.09€
-61 %
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 25AVoltage: 12 / 24V
1 Piece..
14.00€ 5.49€
Ex Tax:4.54€
New
Spring 7.5x20mm, for M4 or M3.External diameter: 7.5mmInner diameter: 5mmLength: 20mmMaterial: Nickel-plated steel 1 unit..
0.05€
Ex Tax:0.04€
-35 %
Composition:
2x 375mm Smooth rod
2x 350mm Smooth rod (2.01 compatible)
2x 320mm Sm..
25.99€ 17.00€
Ex Tax:14.05€
-24 %
Composition:
2x 380mm M10 threaded rod
4x 210mm M10 threaded rod
2x 3..
28.99€ 22.00€
Ex Tax:18.18€
Acrylic Frame (10mm): Laser cut of a high quality sheet of acrylic.
Two possible bearing configurations of heated bed: 3 or 4
..
49.99€
Ex Tax:41.31€
-25 %
MDF (Medium Density Fibreboard) as
a Heated bed mount for Y axis.
Dimensions: 230x230x7mm
Weight: 335g
1 Piece..
3.99€ 2.99€
Ex Tax:2.47€
-31 %
Composition:
M8 Smooth stainless steel rods:
2x 370mm: X Axis
2x 400mm:&nb..
26.99€ 18.50€
Ex Tax:15.29€