Dual v6 Throat - Threat M6 & 7mm diameter - PTFE version - 4.1 ID
3.99€
Tax 3.30€
- Stock: 62
- Model: Dual-4.1-Throat
Model:
ID: 4.1
All Metal
Titanium
Bimetal
Dual v6 Throat - Threat M6 & 7mm diameter - PTFE version - 4.1 ID
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
0.39€
Ex Tax:0.32€
The v6 Heater Block has been upgraded to clamp both the
heater cartridge and thermistor in place. These design improvements
improve the thermal..
0.60€
Ex Tax:0.50€
-70 %
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
96.80€ 28.99€
Ex Tax:23.96€
-69 %
V6 Dual Hotend compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be confi..
84.70€ 26.50€
Ex Tax:21.90€
It is commonly used to increase performance in Hotends All metal , is applied between the throat and the heat sink. Pre - applied in our hotend V..
0.25€
Ex Tax:0.21€
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher th..
4.99€
Ex Tax:4.12€
New
CHC series heating block, ceramic and silver-plated copper, which guarantees precise and uniform heating.Compatible with multiple hotends and extruder..
20.59€
Ex Tax:17.02€
Compact V6 heatsink, can be used for bowden or direct extruders.The internal diameter is 4.2mm, which allows a teflon tube to be inserted up to the th..
2.99€
Ex Tax:2.47€
Compatible with 1.75mm filament
Material: Stainless Steel This model allows the teflon tube reach the throat
This configura..
3.99€
Ex Tax:3.30€
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
0.39€
Ex Tax:0.32€
Related Posts
19 Jun
3
12274
Cool Pull or Atomic Method to clean the nozzle of our 3D Printer Cool Pull or Atomic Method is a technique to clean the nozzle. It can be done after a jam, or as a preventive cleaning after a change of material or many hours of printing. With the Atomic Method technique, we can extract residues and/or burnt particles of filament from the n..
17 May
0
112
The throat, also known as the heat break in English, is an essential component in the hotend of a 3D printer. Its main function is to provide a thermal and mechanical transition between the heater block and the nozzle. In this post we will talk about how it works, its different versions and the most used materials.Hotend throat operation:The throat..