Premium high resolution filament, easy molding, printing and engraving, high rigidity and low shrinkage.
Recommended temperature 190º-220º. Variability of diameter +/- 0,03mm. Compatible with all FDM printers.
Natureworks' polylactic acid under the Ingeo 3D870 brand name is a biopolymer that has environmental benefits as it is made from renewable resources. It is produced by polymerization of lactic acid from corn starch. SAKATA 3D manufactures excellent filaments for 3D printing from this raw material, where it is evident that the rate of fluidity in hot water is higher than that of standard PLA or ABS plastic.
The filaments created with the 3D870 resin have other enhancements such as excellent adhesion to printing surfaces, a feature that optimizes the quality of the first layer and minimizes the risk of deformation.
Gross weight: 1.2 kg
Net weight: 1 kg
Coil vacuum packed with desiccant
|Print Settings (As reference)|
|Printing temperature||190ºC - 220 ºC|
|Heated Bed||No - 60 ºC|
|Layer Fan||Yes, highly recommended.|
|Material||PLA Ingeo 3D870|
Top Positive & Critical Reviews
Top Positive Reviews
Author: Jorge Crespo Díaz
Al día siguiente en casa. La cama imantanda y la lámina flexible son realmente cómodas
Top Critical Reviews
Las últimas bobinas de winkle después de la aparición del coronavirus,han sido un desastre,de diferentes modelos,todos se comportaban de una manera no habitual (he gastado muchísimos kg de allcolo