- Stock: 4
- Model: Prusa-i3-Rework
Available Options
Free shipping to mainland Spain, cheap to other destinations.
Pay in three interest-free installments with PayPal. 0% APR.
Prusa i3 Rework – DIY Kit
This kit includes all the needed components for the construction of Prusa I3 Rework.
Based on:
http://reprap.org/wiki/Prusa_i3_Rework_Introduction
Composition:
Acrylic Frame (10mm)
Rods Kit
Printed Parts
Electronics
Movement Kit
Nuts and Bolts Kit
Different available options
1. Acrylic Frame (10mm):
Laser cut of a high quality sheet of acrylic.
Two possible bearing configurations of heated bed: 3 or 4 bearings.
Two possible support configurations for heated bed: 3 or 4 points of support.
2. Rods Kit:
2x 380mm Threaded rod - Galvanized
4x 210mm Threaded rod- Galvanized
2x 370mm Smooth rod – Stainless steel
2x 350mm Smooth rod – Stainless steel
2x 320mm Smooth rod – Stainless steel
2x 300mm M5 Threaded rod – Stainless steel
The cutting is done by hand, so that the meassure can be slightly higher (+ 1mm or similar) not lower. All rods are shipped without burr and the edges filed down properly.
3. Printed Pats:
Extruder (3,00mm /1,75mm):
Wade Extruder Body
Extruder Ilder
Gears
X Axis:
X Motor and X ilder
X Carriage
Y Axis:
Y Belt Holder
Y motor
Y Ilder
Y Corners
Eje Z:
Z Bottom
Z top
Z Endstop Holder
Fan Duct
Arduino Washers
You can choose the colour, otherwise, we will ship them randomly.
4. Electronics
Mega 2560 R3 (Compatible) 16u2
Ramps 1.4 (we include aluminium heatsink)
Stepper Motor Driver DRV8825 x 4 (with heatsinks and thermal double-sided tape)
Heated Bed MK2B (12v/24v) (or the version you choose)
Thermistor 100k Ω NTC 3950 (with 1m wire)
5x Stepper Motor Nema 17 - 17HS4401/1703HS168A (the rack has a flat part + wires)
Endstop x 3 (wired)
1x 40 x 40 Fan for the electronics or as a layer fan.
1x Hotend (V5 o V6) all metal with heater, thermistor, and 30 x 30 fan. Nozzle at your choice
1x Heat shrinkable tube 2mm2
Wires for Heated Bed
Options (recommeded):
12v 30a DC Power Supply with switch, printed part, 1m2 wire y power adapter
LCD with rotary encoder, SD reader y adapter for Ramps
5. Movement Kit:
12x Linear Bearings LM8UU
4x Angular Bearings 608zz
1x Angular Bearings 624zz
2x Couplers Shaft 5x5mm
2m GT2 Belt made of neoprene with reinforcerd fiberglass
2x GT2 Pulley, 20 teeth, aluminium
6. Nuts and Bolts Kit:
1x Hobbed Bolt
2 x M3x40 Partially treated bolts with springs
1x M8x20 Setscrew for Extruder Ilder
1x M3x10 Setscrew for small gear
2x M5 Nylon Nut (Improvement) for Z axis movement, has excellent resistance to abrasion, it also provides a smooth and reliable movement.
Screws:
41 x M3x14
3 x M3x24
4 x M3x30
6 x M4x20
1 x M8x30
Washers:
53 x M3 (12 x DIN 9021)
6 x M8
34 x M10 (4 x DIN 9021)
Nuts:
33 x M3
6 x M4
2 x M5 (inox)
1 x M8
34x M10
Extra:
4 x Springs for Heated Bed
For the assembly we recommend the following instructions:
http://reprap.org/wiki/Prusa_i3_Rework_Y_axis_assembly
http://reprap.org/wiki/Prusa_i3_Rework_X_axis_assembly
http://reprap.org/wiki/Prusa_i3_Rework_Connecting_X_axis_and_Z_axis
http://reprap.org/wiki/Prusa_i3_Rework_Motor_assembly
http://reprap.org/wiki/Prusa_i3_Rework_X_and_Y_axis_motions
http://reprap.org/wiki/Prusa_i3_Rework_Heated_bed_assemblyr
http://reprap.org/wiki/Prusa_i3_Rework_Extruder_assembly
http://reprap.org/wiki/Prusa_i3_Rework_Electronics_and_wiring
http://reprap.org/wiki/Prusa_i3_Rework_Firmware
0% Customers recommend this product
- 5 Awesome0%
- 4 Great0%
- 3 Average0%
- 2 Bad0%
- 1 Poor0%
Reviews Over Prusa i3 Rework - DIY Custom Kit
- (0)
Total Reviews (0)
click here write review to add review for this product.