Menu
Your Cart

INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament - Smart Materials 3D

INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
New Only a few units in stock -19 %
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament  - Smart Materials 3D
INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament - Smart Materials 3D
40.95€
33.00€
Tax 27.27€
  • Stock: In Stock
  • Model: Innovatefil TPU H+ 1.75mm

Available Options

Is a thermoplastic polyurethane that combines hardness, elasticity and mechanical strength, so it maintains all the advantages of this elastomer, in order that we can make completely rigid parts. Its main features are:

• High resistance to wear and abrasion.
• Decreases impact and vibrations.
• High resistance against fats, oils, oxygen and ozone.
• Great resistance against hydrolysis and stabilized in UV light.
• High resistance against microorganisms.

Innovatefil® TPU HARDNESS+ is delivered in a vacuum bag with a great barrier against moisture so that the filament cannot absorb humidity. Before bagging, the filament follows the strictest quality controls by dehumidifying the raw material until the moisture content is lower than 0.02%.
Once the product is unpacked we recommend to keep it in a dry and dark environment. If not maintained in a suitable environment the material can absorb up to 0.5% atmospheric moisture, this can create water vapour in the extrusion that can end up in a bad surface finish.
PROTECT FROM MOISTURE
Once printing is finished it is recommendable to clean the nozzle eliminating the excess of material to avoid seals and defects unwanted, if several materials are used it is advisable to have a nozzle for each material to avoid being mixed.

    Print Settings (As reference)
    Printing temperature210C - 230ºC
    Heated Bed80C - 100ºC
    Layer Fan20-100%
    MaterialTPU H+

    0% Customers recommend this product

    • 5 Awesome
      0%
    • 4 Great
      0%
    • 3 Average
      0%
    • 2 Bad
      0%
    • 1 Poor
      0%
    Please login or register to review

    Reviews Over INNOVATEFIL TPU HARDNESS+ - 1.75mm - Hardened TPU Filament - Smart Materials 3D

    • (0)

    Total Reviews (0)
    click here write review to add review for this product.