Lead Screw Dia 8MM Thread 8mm Tr8x2 Length 300mm / 350mm / 400mm / 500mm with copper nut
3.99€
Tax 3.30€
- Stock: In Stock
- Model: LeadScrew-T8x2
Model:
Tr8x2
Tr8x8
Lead Screw Dia 8MM Thread 8mm Tr8x2 Length 300mm / 350mm / 400mm / 500mm with copper nut
- Copper nuts are characterized by their resistance.
- The POM is a material with a low friction that is machined very precisely, this makes the movement with these nuts is very precise and without play.
-73 %
Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivatives, and also used for the tensors in X-axis and Y-a..
0.99€ 0.27€
Ex Tax:0.22€
Coupler Shaft from 5mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 5mm Output: 8mm Lenght: 25 mm Diame..
1.00€
Ex Tax:0.83€
-32 %
Important: Due to the development of this
design the pieces will be printed after the payment realization, to
always send the latest version availab..
80.99€ 55.00€
Ex Tax:45.45€
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions:&..
0.99€
Ex Tax:0.82€
Only a few units in stock
-54 %
Precition motor with great power, its 5.18 to 1 relation multiplies the motor strength, which makes it ideal for bowden extruders, or any other system..
65.00€ 29.99€
Ex Tax:24.79€
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions:&..
0.99€
Ex Tax:0.82€
Out of Stock
This copper nut is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Thread pitch: 2mm 1 ..
0.99€
Ex Tax:0.82€
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32..
3.59€
Ex Tax:2.97€
Lubricating grease for maintenance of your 3D printer.Especially recommended for spindles.Material: GreaseType: LubricationSize: 10g..
1.15€
Ex Tax:0.95€
Only a few units in stock
-15 %
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that do..
8.75€ 7.44€
Ex Tax:6.15€