Hot Sales --22 %
Manual adjustment M3 nut for heated bed leveling
0.09€
0.11€
Tax 0.09€
- Stock: In Stock
- Model: Tuerca ajuste M3
This product has a minimum quantity of 4
Manual adjustment M3 nut for heated bed leveling
-61 %
You can control the current of devices or accessories, such as a hot bed, or different heaters:Maximum current: 25AVoltage: 12 / 24V 1 Piece..
14.00€ 5.49€ Ex Tax:4.54€
Hot Sales -75 %
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6..
3.99€ 1.00€ Ex Tax:0.83€
Hot Sales -93 %
It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm d..
4.99€ 0.35€ Ex Tax:0.29€
-63 %
Support with bearing for rods or 8mm axes, it is used for both 3D printers and CNC machines.1 Piece..
4.00€ 1.49€ Ex Tax:1.23€
-65 %
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to the..
14.99€ 5.30€ Ex Tax:4.38€
-62 %
The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing.Thus the warping (parts bulge..
17.99€ 6.80€ Ex Tax:5.62€
-9 % Discontinued
MK2b Heated Bed 300x200mm The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhered during printing.&nb..
32.99€ 29.99€ Ex Tax:24.79€
-53 %
All features similar to MK2 12 VoltHeatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory T..
49.99€ 23.50€ Ex Tax:19.42€
-70 %
All features similar to MK2 12v / 24v Volt.Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but no..
35.00€ 10.50€ Ex Tax:8.68€
-52 % Out of Stock
Hotbed size 220x280 With countersunk holes for screw head, compatible with most Y-axis carriages, including 220x220 or 214x214 bed carriages, because ..
45.00€ 21.50€ Ex Tax:17.77€
-25 %
MDF (Medium Density Fibreboard) as a Heated bed mount for Y axis. Dimensions: 230x230x7mm Weight: 335g 1 Piece..
3.99€ 2.99€ Ex Tax:2.47€
Only a few units in stock -50 %
Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced..
2.00€ 1.00€ Ex Tax:0.83€
Only a few units in stock -33 %
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of th..
0.40€ 0.27€ Ex Tax:0.22€
Hot Sales -32 % Out of Stock
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of th..
0.25€ 0.17€ Ex Tax:0.14€
-18 % Out of Stock
Connector L shaped to reinforce the union of the corners in right angle joints of aluminum profiles.Nickel-plated surface for good resistance to oxida..
0.55€ 0.45€ Ex Tax:0.37€