ALU Heatbed MK3 300x200 12v
Click Image for Gallery
- All features similar to MK2 12 Volt.
- Heatbed with 3mm aluminum core. You can print directly on the heatbed, the glass is recommended but not mandatory
- The metallic side is the top print side and the black side is the bottom side. We recommend insulating the bottom side with Thermal Insulator
- Dual power supply. Operate at 12 Volt.
- A central mounting hole on the front side to allow for three point mounting.
- Large solder pads
- Dimensions 314mm x 214mm (same as MK2)
- 1 layer 35μm copper
- Maximum temperature rating: 180ºC