New
-57 %
5 - 10 Days
MK52 Bed Spacers - Prusa MK3
-68 %
Hobbed Bolt for 3D printer, based on Reprap community design: http://reprap.org/wiki/Wade's_Geared_Extruder#The_Hobbed_Bolt
M8 x 60mm knu..
8.99€ 2.85€
Ex Tax:2.36€
-50 %
Special Hardware Set: 2x M3x40 Partially threated bolts with
springsM8x20 setscrew for the extruder
idlerM3x10 setscrew small..
5.99€ 3.00€
Ex Tax:2.48€
-38 %
Discontinued
WILSON NUTS AND BOLTSComposition: -51x M5x8-51x M5 T Slot Nuts -4x M5 T Slot Nuts (They can be inseted after the m..
29.99€ 18.50€
Ex Tax:15.29€
-40 %
Prusa i3 Rework Nuts and Bolts:Bolts:
41 x M3x14
3 x M3x24
4 x M3x30
6 x M4x20
1 x M8x30..
20.00€ 12.00€
Ex Tax:9.92€
-73 %
P3Steel by HTA3D Nuts and Bolts:Screws:M3x8 - 14 unitsM3x12 - 64 unitsM3x16 - 7 unitsM3x20 - 4 unitsM3x25 - 8 un..
20.00€ 5.35€
Ex Tax:4.42€
The springs are used in 3D printers for different reasons, the main one is for elements that require a certain pressure, such as the extruder tensione..
0.17€
Ex Tax:0.14€
Only a few units in stock
-36 %
Actual Version: 2.1Mini 12864 LCD for an independent printing.Small LCD, but with all the information and features of the popular 12864 LCD, it's easi..
24.99€ 15.99€
Ex Tax:13.21€
Only a few units in stock
-40 %
Version 2.1Super silent drivers from Trinamic brand.This is the new Trinamic brand controller, unifies functions of the TMC2208 and the TMC2130, becom..
15.00€ 8.99€
Ex Tax:7.43€
New
-13 %
5 - 10 Days
Current Version: V1.2bDesigned for a single extruder 3D printer. Many interfaces are reserved for features such as AC detection, filament detection, l..
40.00€ 34.99€
Ex Tax:28.92€
New
Only a few units in stock
-17 %
Actual Version: 1.2The S6 board is based on the STM32F446 32bit mcu has six drive sockets and supports the full range of TMC drives. They have fully e..
48.40€ 39.99€
Ex Tax:33.05€
New
-54 %
Out of Stock
Version 1.2Super silent drivers from Trinamic brand.Features:1.4A integrated power tube drive current2A maximum currentVoltage range 4.75V-36VMicroste..
12.00€ 5.50€
Ex Tax:4.55€
New
Only a few units in stock
-53 %
This copper nut is used for the movement of the Z axis in 3D printers. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions:&..
4.00€ 1.89€
Ex Tax:1.56€
New
Only a few units in stock
-25 %
Super economical PETG with excellent value for money. This PETG stands out for offering mechanical properties much higher than PLA, in terms of workin..
20.00€ 14.95€
Ex Tax:12.36€
New
-70 %
High quality and precision nozzle for V6 type fusers. Real nozzle clone manufactured by E3D, practically indistinguishable. Special features..
10.00€ 2.99€
Ex Tax:2.47€
-36 %
Discontinued
3D printer board compatible with 12 and 24v, uses the powerful ARM cortex-M3 CPU 32-bit processor, and is compatible with Marlin 2.0 onwards.Compatibl..
39.00€ 24.99€
Ex Tax:20.65€
Hot Sales
-92 %
It is used to connect hotends and extruders to teflon tube. On one side it has a thread of 1/8" and on the other a teflon tube connector of 4mm d..
4.99€ 0.39€
Ex Tax:0.32€
Only a few units in stock
-60 %
GT2 strap for reprap, made of neoprene with anti wear coating and reinforced with glass fiber inside.These belts are very high quality ideal to reduce..
6.99€ 2.80€
Ex Tax:2.31€
Hot Sales
-65 %
Out of Stock
Rigid coupler Shaft from 5mm to 8mm, commonly used for Z axis. Material: Aluminium Input: 5mm Output: 8mm Lenght: 25 mm ..
2.75€ 0.95€
Ex Tax:0.79€
Only a few units in stock
-33 %
CharacteristicsRated voltage: 24vIncludes strong neodymium magnets that do not lose properties up to 140ºC9 fixing holes for countersunk screwsPre-wel..
89.00€ 59.95€
Ex Tax:49.55€