New
-21 %
MKS Sgen_L - 32 Bit Board for 3D Printer - Compatible with UART Drivers
38.00€
29.99€
Tax 24.79€
- Stock: In Stock
- Model: Sgen_L-MKS
MKS Sgen_L - 32 Bit Board for 3D Printer - Compatible with UART Drivers
-21 %
Current Version 1.0The TMC2226 is an ultra quiet motor controller for two phase stepper motors.The sophisticated StealthChop2 guarantees quiet operati..
9.50€ 7.50€
Ex Tax:6.20€
New
-15 %
MGN9 Linear Guide, to choose from in different lengths.It is used for precision linear movements in 3D printers and other high-end machines.We recomme..
13.49€ 11.50€
Ex Tax:9.50€
New
-15 %
It is used for precision linear movements in 3D printers and other high-end machines.We recommend greasing them with lithium grease or similar that do..
8.45€ 7.22€
Ex Tax:5.97€
-54 %
Version 3.0Super silent drivers from Trinamic brand.This is the new Trinamic brand controller, unifies functions of the TMC2208 and the TMC2130, becom..
15.00€ 6.85€
Ex Tax:5.66€
Only a few units in stock
-45 %
Current version: 1.2The TMC2209 improves on its predecessor the incorporation of the StallGuard4, which allows us among other things to use it as a se..
16.00€ 8.75€
Ex Tax:7.23€
Recommended
Only a few units in stock
-36 %
The SKR V 1.4 plate is the successor to the popular SKR 1.3, it incorporates all the features of its previous model improving key points such asSuppor..
39.00€ 24.99€
Ex Tax:20.65€
New
-30 %
The TMC2209 has all the functions of the TMC2208, it can be replaced directly. The TMC2209 have a better heat dissipation, support a higher current an..
8.50€ 5.99€
Ex Tax:4.95€
New
-22 %
Simple, light and precise automatic leveling system.Includes the classic short cable and extension cable with DuPont connectors (and XH2.56 plug to ch..
23.00€ 17.99€
Ex Tax:14.87€
-63 %
RepRap Pololu Arduino Mega Shield or RAMPS. It is designed to connect all the electronic components required for a RepRap. The modular design inc..
14.99€ 5.49€
Ex Tax:4.54€
Only a few units in stock
-32 %
The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digital input/output pins (of which 15 can be used as PW..
17.99€ 12.25€
Ex Tax:10.12€
Recommended
-40 %
Mega 2560 R3 (Compatible) 16u2This is a clone of quality, not only just aesthetically , also uses the same chip USB connection so it is 100 % compatib..
24.99€ 14.95€
Ex Tax:12.36€
Only a few units in stock
-48 %
Shield for Arduino UNO and other compatible boards, it is used to control CNC machines as plotters, laser engravers, milling machines, etc. 1 Piece wi..
4.95€ 2.59€
Ex Tax:2.14€
Only a few units in stock
-67 %
UNO is a micro controller board with 14 digital input/output pins, 6 analog inputs. It is used in many applications: CNC machines, plotters, las..
19.00€ 6.35€
Ex Tax:5.25€
New
-30 %
The TMC2209 has all the functions of the TMC2208, it can be replaced directly. The TMC2209 have a better heat dissipation, support a higher current an..
8.50€ 5.99€
Ex Tax:4.95€
New
-22 %
Simple, light and precise automatic leveling system.Includes the classic short cable and extension cable with DuPont connectors (and XH2.56 plug to ch..
23.00€ 17.99€
Ex Tax:14.87€
New
-13 %
Version 1.0Based on the ESP8266 WIFI module, Makerbase develops this tool that allows us to configure the Wifi function in a simple and practical way ..
8.00€ 6.99€
Ex Tax:5.78€
New
-20 %
Available in seven languages.Lets you preview the gcode and display the model on print.Cortex-m4 processor, 168M frequency, great definition.With 3.5 ..
49.99€ 39.99€
Ex Tax:33.05€
Check out this bundle
..
