We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

PLA Filament Easy Printing - 1,75mm - ALL COLORS Materials 3D - 1kg - Ingeo 3D850

PLA Filament Easy Printing - 1,75mm - ALL COLORS Materials 3D - 1kg - Ingeo 3D850

CHARACTERISTICS:  

Filament based on PLA Ingeo 3D850

Its main features are its ease of printing and ceramic finish. 

It is suitable for contact with food. 

It does not generate warping and ithas excellent adhesion to bed and between layers. 

This material provides your parts: very good dimensional stability, stiffness, heat resistance, and a thin and shiny surface finish, hardly improved. 

Thanks to its rapid crystallization, you can print faster without deformation and with precise details. 


PRINTING PARAMETERS: 

- Extruder temperature: 190ºC - 230ºC 

- Bed temperature: Does not need (if applicable: 50ºC y 70ºC) 


PROPERTIES: 

- Easy printing 

- No warping 

- Suitable for contact with food 

- High quality surface finish and shine 

- Excellent strength and stiffness 

- Fast crystallization 


Net Weight: 

1Kg 


TECHNICAL DATA: 

- Density: 1,24 g/cm2 

- Fusion temperature: 165ºC – 180ºC 

- Heat distortion temperature: 144ºC 

- Tensile strength: 9,500 (65.5) Mpa 


All coils have individual case and are vacuum packed with a sachet of silica gel desiccant inside 

Diameter 1,75mm ±0.02mm 

Print Settings (As reference)
Printing temperature190ºC - 230ºC
Heated BedOff - 70 ºC
Layer FanYes - Recomended

Write a review

Note: HTML is not translated!
    Bad           Good

  • 18.94€
  • Ex Tax: 15.65€

Available Options

Tags: 1.75mm, PLA, filament, All Colors Materials 3D, Ingeo 3D850,

Related Posts - HTA3D Blog
How to print PLA?

How to print PLA?

Juan J 18/01/2017 0
How to print PLA?    PLA filament is undoubtedly the easiest and the most popular filament. Thus, nowadays it is more than the 80% of the total of manufactured filaments for 3D printers.PLA (polylactic acid) is produced from lactic acid, which is obtained from corn starch, cassava, or sugar cane.  Among its advantages we can point out:It melts at l...
Read More
Pokeball

Pokeball

Fátima 25/08/2016 1
 We introduce you one of our latest printings as followers and users of Pokémon Go.  As you can see, it is an assembly of different pieces in three different colours that, with the aid of a small coil and a short segment of filament, it opens and closes itselft smoothly. Whether it works, it only depends on your ability as Pokémon coach!   You can ...
Read More