-29 %
Printed parts of X axis of the 3DSteel printer
12.00€
8.50€
Tax 7.02€
- Stock: In Stock
- Model: PiezasImpresas-EjeX-3DSteel
Printed parts of X axis of the 3DSteel printer
Only a few units in stock -50 %
Support to adjust horizontally the height of your 3D printer or other machines. The base is a non-slip rubber.Specifications:Base material: reinforced..
2.00€ 1.00€ Ex Tax:0.83€
Hot Sales -33 %
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degree..
0.12€ 0.08€ Ex Tax:0.07€
Hot Sales -30 %
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degree..
0.10€ 0.07€ Ex Tax:0.06€
Hot Sales -67 %
Belt GT2 for reprap, made of neoprene with reinforcerd fiberglass. Dimensions: Width: 6mm Step: 2mm Belt heigh: 1.38 mm Teeth..
2.99€ 1.00€ Ex Tax:0.83€
Hot Sales -62 %
Bearings LM8UU stardard, which are used in reprap printers for the linear movement using smoth ribs of 8mm. Depending on the number of bearings ..
1.20€ 0.45€ Ex Tax:0.37€
-37 %
KIT P3STEEL PRINTED PARTS Components: -Extruder: Body, ildler and budas adaptor &n..
24.00€ 15.00€ Ex Tax:12.40€
-25 %
KIT KOSSEL PLA+ABS PRINTED PARTS Based on: http://reprap.org/wiki/Kossel This kit is printed pieces following ..
39.99€ 29.99€ Ex Tax:24.79€
-34 %
KIT PRUSA I3 REWORK PRINTED PARTS Printed parts: -Extruder (3,00mm /1,75mm):Extruder BodyExtruder IlderGears (Improvement:..
32.00€ 21.00€ Ex Tax:17.36€
-35 %
ITOPIE PRINTED PARTS KIT Basado en: http://reprap.org/wiki/ITopie Components: -Extruder (3mm/ 1.75mm) -Extruder..
24.00€ 15.50€ Ex Tax:12.81€
-29 %
KIT PRUSA I3 ABS PRINTED PARTS - BOXED STYLE FRAME Based on: http://78.47.92.212/i3_documentation_pics/singlepage..
34.00€ 24.00€ Ex Tax:19.83€
Check out this bundle
This kit includes the components to update the Z axis with the Nema17 motors with trapezoidal spindle integrated to the motor. The kit can be modified..
Related Posts
18 Jul 
2 6106
Marlin 2.0 is now available. And, although it is still in the "beta" phase, in RAMPS it is stable enough to be used, and it has many important advantages over versions 1.1.X. These include:Complete compatibility with TM2130, including menus to adjust the intensity, operating mode, sensitivity for sensorless homing, etc.Improved acceleration and mov..
15 Jul
6 4854
We have based our new 3DSteel model on the popular P3Steel kit, keeping the same frame and rods, as well as many other components to allow the upgrade to this new version.We have prepared different packs, so you can make a total or partial update with the greatest comfort and flexibility possible. Next, you will find the different parts that you ca..