We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

Prusa i3 Printed Parts + Movement Kit + Special Harware Set

-30% Prusa i3 Printed Parts + Movement Kit + Special Harware Set

PRUSA I3 PRINTED PARTS KIT


Based on: http://reprap.org/wiki/Prusa_i3 

In thhis selecion of parts we try to keep the essence of the original Josef Prusa design, updating some components in order to maximize compatibility with GT2 (more precision) and groove mount hotends, like our all metal hotend or any other E3D type. 



This kit contains:

-All Printed parts that you will need to build your Prusa i3 3D printer 

-All Bearings, belts, pulleys and flexible couplings that you will need to build your Prusa i3 3D printer 

-The Special hardware you'll need for this project and that hardly find in hardware stores or unspecialized shops.


PRINTED PARTS:


-Extruder (3mm / 1.75mm):
Extruder body
Ilder

- Gears:
Big gear
Small gear
 
- X axis:
X carriage
X motor
X ilder

- Y axis:
Y motor support
Y tensioner
Y belt holder
4x Y corner

- Z axis:
Z top
Z bottom

-Others:
​Pulleys for 623zz bearings, we include the parts for two options mounting types:

-Classic model: two parts must be glued together
​-One single piece in which the bearings go inside by pressure (we suggest to use 2 bearings for each pulley to maximize durability)

Endstop holders (two types)


  

You can choose the colour, otherwise, we will ship them in any available colour.



Movement kit:

10x LM8UU linear bearing
4x 608zz Angular Bearings
4x 623zz Angular Bearing
2x 5x5mm Coupler shaft
2m GT2 Belt, Made of neoprene , fiberglass reinforced
2x 20 teeth aluminium timing pulley



SPECIAL HARDWARE SET KIT

Hobbed Bolt
 2x M3x40 Partially treated bolts with springs:
 M8x20 setscrew for extruder idler:
 M3x10 setscrew small gear:
2x M5 Black / White nylon nut for Z axis movement, great IMPROVEMENT. Nylon has an excelent abrasion resistance, also provides a more soft and reliable z movement.



You can buy one of our Hotends, with discount for this kit.



Write a review

Note: HTML is not translated!
    Bad           Good

Quality:
 

All our kits are printed with high quality materials, producing very strong and durable parts.

  • Dimensional:

The gears are completely round and the teeth fit deeply.

  • ​Infill:

​All pieces have an approximately infill of 40% plus a minimum perimeter of 1 mm (lower, upper and sides).

  • Superficial:

All parts are inspected after being printed in order to look for flaws. They have, as it is natural, the characteristics of the 3D printing process.

 

Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 3292
  • Brand: HTA3D
  • Product Code: Prusa i3 -Movimiento
  • Availability: In Stock
  • 71.16€
  • 49.49€
  • Ex Tax: 40.90€

Available Options

Tags: Printed Parts + Movement Kit, Saving Kits,