We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

Prusa i3 Rework Printed Parts + Movement Kit + Special Harware Set

-31% Prusa i3 Rework Printed Parts + Movement Kit + Special Harware Set


Based on: http://reprap.org/wiki/Prusa_i3_Rework_Introduction 

This kit contains: 

-All Printed parts that you will need to build your Prusa i3 Rework 3D printer   
-All Bearings, belts, pulleys and flexible couplings that you will need to build your Prusa i3 Rework 3D printer 
-The Special hardware you'll need for this project and that hardly find in hardware stores or unspecialized shops 


-Extruder (3,00mm /1,75mm):
Extruder Body
Extruder Ilder
Gears (Improvement: These gears are helical and are specially designed for Prusa i3 Rework)
Budas Adapter (Extra: With this adapter you can use any Hotend Budas-Style)
Fan Duct

- X axis 
X Motor
X ilder
X axis Carriage (This carriage uses four bearings LM8UU and it supports GT2 belts)

- Y axis 
Y Belt Holder
Y motor
Y Ilder
Y Corners

-Z axis:
Z Axis Bottom
Z Axis top
Z Endstop Holder 

Arduino washers 

You can choose the colour, otherwise, we will ship them in any available colour.

Movement kit:

12x LM8UU linear bearing
4x 608zz Angular Bearings
1x 624zz Angular Bearing
2x 5x5mm Coupler shaft
2m GT2 Belt, Made of neoprene , fiberglass reinforced
2x 20 teeth aluminium timing pulley


Hobbed Bolt
2x M3x40 Partially treated bolts with springs
M8x20 setscrew for extruder idler
M3x10 setscrew small gear
2x M5 Black or white nylon nuts for Z axis movement, great improvement. Nylon has an excelent abrasion resistance, also provides a more soft and reliable z movement.

You can buy one of our Hotends, with discount for this kit.

Write a review

Note: HTML is not translated!
    Bad           Good


All our kits are printed with high quality materials, producing very strong and durable parts.

  • Dimensional:

The gears are completely round and the teeth fit deeply.

  • ​Infill:

​All pieces have an approximately infill of 40% plus a minimum perimeter of 1 mm (lower, upper and sides).

  • Superficial:

All parts are inspected after being printed in order to look for flaws. They have, as it is natural, the characteristics of the 3D printing process.


Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 3213
  • Product Code: Prusai3-Rework-Movementkit
  • Availability: In Stock
  • 75.22€
  • 51.99€
  • Ex Tax: 42.97€

Available Options

Tags: Printed Parts + Movement Kit, Saving Kits,