SAKATA 3D

HIPS filament is a thermoplastic with similar qualities to ABS but with a high resistance to atmospheric agents and a superior resistance to UV rays. Another interesting application is that it can be used as a support material, given its solubility in limonene.Printing temperature: 235-245 ºCBed tem..

Premium high resolution filament, easy molding, printing and engraving, high rigidity and low shrinkage.Recommended temperature 190-220ºC. Variability of diameter +/- 0,03mm. Compatible with all FDM printers.Natureworks' polylactic acid under the Ingeo 3D870 brand name is a biopolymer that has envir..

SAKATA 3D PA-GF20-FR filament is a 3D printing material specifically developed for automotive and industrial applications.It is composed of a copolyamide (Nylon) reinforced with 20% fiberglass and thermally stabilized, which allows excellent resistance and durability. In addition, it incorporates a ..

It is an unreinforced copolyamide (Nylon) with high transparency, developed specifically for 3D printing.It offers excellent dimensional stability, stiffness, flexibility and shock resistance, and a very good balance between mechanical performance, shrinkage and adhesion to the bed. Unlike other Nyl..

PA-CF15 from Sakata3D Filaments is a copolyamide filament reforged with 15% special carbon fibers (CF) and heat stabilized, specially formulated for 3D printing applications. Its main characteristics are greater rigidity, excellent mechanical properties and resistance to abrasion, while maintaining ..

Sakata 3D OBC filament allows the creation of lightweight (up to 25%) and durable parts.Its semi-crystalline structure gives it excellent properties in the Z-axis compared to other materials, retaining more than 70% of the mechanical properties obtained in the XY axes.Its high chemical resistance an..

Pla Ingeo 3D700 is specially manufactured to offer low thermal shrinkage, around 0.25%, about 4 to 5 times lower than conventional PLA, this implies the following advantages:Better results in large format 3D printers.Superior dimensional accuracy.Print finish with fewer artifacts produced by materia..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Raw Material: IngeoTM NatureWorks PLA 3D850* Extrusion temperature of about 180 °C - 210 °C Recommended temperature hot bed 0 - 60ªC (*: NatureWorks an..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Raw Material: IngeoTM NatureWorks PLA 3D850* Extrusion temperature of about 180 °C - 210 °C Recommended temperature hot bed 0 - 60ªC (*: NatureWorks an..

The new GLASS family is characterized by its translucent colors. Unlike general-purpose PLA, PLA 850 has higher crystallization speed, temperature resistance and mechanical properties. Thanks to its good adhesion to the bed and its reduced shrinkage capacity, it allows to obtain parts with exce..

The Sakata MAGIC+ range has a greater amount of glitter, so the effect is much more pronounced than the normal magic colors, with this extra shine your pieces will not go unnoticed.PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D ..

PLA (polylactic acid) is a biodegradable polymer derived from renewable resources. It has gained much popularity in 3D printing. Extrusion temperature: 195 °C - 205 °C Recommended temperature heated bed: 40ªC (optional)Features:Sakata 3D Filaments PLA-M filament has been specifically formu..