- Stock: In Stock
- Model: SMARTFIL CLEAN 1.75mm
Available Options
Clean your printer extruder to have a better maintenance of your 3D printer and also increase the lifetime of your hotend.
When you use different filaments in you 3D printer, eventually you can get obstructions and defects in your printings. This filament is thought out to clean the extruder completely. This way you will guarantee the correct working and maintenance of your 3D printer.
INSTRUCTIONS TO CLEAN THE EXTRUDER.
Temperature is a key factor if you want this material to clean well
the extrusion system of your 3D printer. For that, just follow this
simple steps: Heap up the extruder until it exceeds in 10ºC the melting
temperature of the last material you have used. For example, if you have
used ABS in your 3D printer previously, you should set the extrusion
temperature at 250ºC aproximately.
After that, load our SMART
CLEAN FILAMENT and extrude a certain amount of material. Finally, unload
the filament and reload your 3D printer with the material you want to
use.
| Print Settings (As reference) | |
| Printing temperature | 190ºC - 250ºC |
| Heated Bed | Opcional |
| Layer Fan | Optional |
0% Customers recommend this product
- 5 Awesome0%
- 4 Great0%
- 3 Average0%
- 2 Bad0%
- 1 Poor0%
Reviews Over SMARTFIL CLEAN 1.75mm - Filament To Clean Extruder - Smart Materials 3D
- (0)
Total Reviews (0)
click here write review to add review for this product.
