SMARTFIL Wood 1.75mm - Wood Filament - Smart Materials 3D

Premium PLA filament with high percentage of natural wood, does not incorporate recycled or recovered material. Excellent printing resolution.

What can you achieve with this filament?

This filament presents many design possibilities. We can generate from sculptural replicas, models simulating wood, pieces of habitat design, furniture and even restoration, wooden tools, etc...

Most important tips for a correct use

Due to the high quantity of wood particles, clogging may occur in nozzles with a diameter of 0.4 mm, so we recommend using nozzles with a diameter of 0.6 or larger to avoid this problem.

It is advisable to feed the printer without making sharp turns in Bowden systems to avoid filament breakage.

It is recommended to print with layer height higher than 0.2 mm.

It is important to avoid that the material heats up in the extruder while the printing is in standby because it can cause clogging due to crystallization of the material.

The surface appearance can be varied by increasing the printing temperature and getting darker tones.