Menu
Your Cart

Search

Search Criteria

Products meeting the search criteria

Stock: In Stock Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the heater cartridge a..
4.85€ Ex Tax:4.01€
Stock: In Stock Model: CHC-b3950-24V
CHC series heating block, ceramic and silver-plated copper, which guarantees precise and uniform heating.Compatible with multiple hotends and extruders, such as V5, V6, CR10, Hemera, Matrix etc.Ceramic block, resistant to high temperatures (up to 300-320ºC).104NT-4 thermistor, TJC8A-M-2P connector. ..
19.50€ Ex Tax:16.12€
Stock: In Stock Model: CHC-PRO-b3950-24V
CHC series heating block, ceramic and silver-plated copper, which guarantees precise and uniform heating.CHC PRO, with the longer block, guarantees a larger melting area and reaches the desired temperature faster.Compatible with multiple hotends and extruders, such as V5, V6, CR10, Hemera, Matrix et..
25.50€ Ex Tax:21.07€
Stock: In Stock Model: V6-Heatsink-Compact
Compact V6 heatsink, can be used for bowden or direct extruders.The internal diameter is 4.2mm, which allows a teflon tube to be inserted up to the throat, thus minimizing friction.Connections:M7 Bottom - Compatible with V6 style throats..
2.50€ Ex Tax:2.07€
Stock: In Stock Model: Dual-All-Metal-Throat
Compatible with 1.75mm filament  Material: Stainless Steel This model allows the teflon tube reach the throat  This configuration allows printing with PLA and flexible filaments is much easier, allows printing at temperatures above 260 °C..
3.99€ Ex Tax:3.30€
Stock: In Stock Model: Dual-4.1-Throat
Compatible with 1.75mm filament  Material: Stainless Steel This model allows the teflon tube reach the nozzle  This configuration allows printing with PLA and flexible filaments is much easier ..
3.99€ Ex Tax:3.30€
Stock: In Stock Model: Extender-Melt-zone-HFPlus
Fusion zone extender to increase hotend flow. PLUS version extender, that divide the filament into 3 finer threads, which makes the material melt faster and we can increase the printing speed.It is installed between the heating block and the nozzle, simply and quickly, thus increasing the volum..
9.99€ Ex Tax:8.26€
Stock: In Stock Model: V6-Heater-Block-PT100
The v6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor firmly in is place. These design improvements improve the thermal response of the Hotend and make thermistor assembly easier.This product also comes with the following fixings:1pc with M3x0.5x3 to clam..
0.90€ Ex Tax:0.74€
Stock: In Stock Model: Heater-Block-Vol
The v6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor firmly in is place. These design improvements improve the thermal response of the Hotend and make thermistor assembly easier.It includes:One M3x3 grub screw to hold the thermistor and two M3x10 screws ..
1.90€ Ex Tax:1.57€
Stock: In Stock Model: Boquilla-MK8-0.3
M6 threaded nozzle for MK8 extruders, for Ender, Creality, etc.Diameter: 0.3mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..
0.45€ Ex Tax:0.37€
Stock: In Stock Model: Boquilla-MK8-0.4
M6 threaded nozzle for MK8 extruders, for Ender, Creality, etc.Diameter: 0.4mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..
0.45€ Ex Tax:0.37€
Stock: In Stock Model: Boquilla-MK8-0.5
M6 threaded nozzle for MK8 extruders, for Ender, Creality, etc.Diameter: 0.5mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..
0.45€ Ex Tax:0.37€
Showing 1 to 12 of 31 (3 Pages)