Search

Nema 17 motor cable.It has XH2.54 DuPont on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 0.5 meters1 unit..

Nema 17 motor cable.It has XH2.54 DuPont on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 1 meter1 unit..

Nema 17 motor cable.It has XH2.54 connector on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 0.5 meters1 unit..

Nema 17 motor cable.It has XH2.54 connector on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 1 meter1 unit..

Precision motor T8x8 trapezoidal screw integral with the shaft. By eliminating the need for flexible couplings problems of shaft misalignment are eliminated and results in a more compact solution. Specifications:  Shaft length: 310mm  Step : 8mm 1/32  Controller re..

Precision motor T8x8 trapezoidal screw integral with the shaft. By eliminating the need for flexible couplings problems of shaft misalignment are eliminated and results in a more compact solution. Specifications:  Shaft length: 350mm  Step : 8mm 1/32  Controller re..

Precition motor with great power, its 5.18 to 1 relation multiplies the motor strength, which makes it ideal for bowden extruders, or any other system that needs big strength and precisition at slow turn speeds. The number of complete steps per revolution is 1036.Specifications:  ..

Features:Nema14 motor, small in size, light in weight and high in quality.High temperature resistant.Long service life, up to 30,000 hours.Step Angle: 1.8±5%/StepCurrent: 1.88A/PHASENumber of teeth: 10 teethWeight: 83gSize: about 51x36x23mmLead wire length: 4CM/1.57inExtension cable: 70cm1 piece&nbs..

Features: Each motor includes 1 meter of wire with dupont connector at its end. Nominal electrical specifications:ModelStep Angle (deg)Motor Length (mm)Rated Current (A)Phase resistence (ohm)Phase inductance (mH)Holding Torque (N·cm min)Detent Torque (N·cm max)Rotor Inercia (g·cm2)Number o..

Features:17HS3401: Compact Size, ideal for applications where you need lightweight, as mobile extruders, or other cases that works with low loads as CNC lasers, plotters and others. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases..

Features:17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases the use of pu..