Search Criteria
Products meeting the search criteria
Stock: In Stock
Model: Octopus
Octopus Board V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32F446ZET6 114PinSD protocol: SDIOWi-Fi module interface: Special expansion interfaceCANBus: CANBus with RJ11 interfacePower: HB9500 9.5mm Pitch screw terminals (High current)Three group..
56.75€
Ex Tax:46.90€
New
Stock: In Stock
Model: Octopus-PRO-H446
Octopus Board H446 V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32F446ZET6 114PinFrequency: 180MHzFlash: 512KSD protocol: SDIOWi-Fi module interface: Special expansion interfaceSoporte wifi module: ESP8266 (MAX500k7s(CANBus: CANBus with RJ11 int..
63.99€
Ex Tax:52.88€
Stock: In Stock
Model: Octopus-PRO-H723
Octopus Board H723 V1.1 from bigtree-tech.FeaturesCartridges Heater: 4Controllable fans: 6Normally Open Fans: 2MCU: STM32H723ZET6 114PinFrequency: 550MHzFlash: 512KSD protocol: SDIOWi-Fi module interface: Special expansion interfaceSoporte wifi module: ESP8266 (MAX500k7s(CANBus: CANBus with RJ11 int..
65.99€
Ex Tax:54.54€
New
Out of Stock
Stock: Out of Stock
Model: ADXL345 V2.0
Version: 2.0BIGTREETECH ADXL345 V2.0 is a module for 3D printer resonance compensation. It can communicate through USB, greatly simplifying wiring.Main features:The board has a reserved BOOT button for easey firmware updates.Reserved solder points enable users to customize wiring easily.The USB port..
11.35€
Ex Tax:9.38€
Stock: In Stock
Model: BTT-CB1
Version: 2.2CB1 outputs signals to the motherboard through the micro BTB two-pin connection, including 100M Ethernet, HDMI, etc. Also, built-in 2.4G Wi-Fi. With its powerful 64-bit ARM Quad Core processor and 1 GB of DDR3 RAM, it has enough power to run Klipper, Linux or Debian.Compatible with Manta..
36.75€
Ex Tax:30.37€
New
Out of Stock
Stock: Out of Stock
Model: BTT-Pi
Version: 1.2Features:Strategic Partnership KLIPPER and BIGTREETECH - The cooperation between KLIPPER and BIGTREETECH makes firmware for 3D printing enthusiasts more convenient to use and helps to further enhance the printing experience.Efficient and Powerful - 64-bit Quad-Core Architecture │ ARM®Cor..
34.99€
Ex Tax:28.92€
New
Stock: In Stock
Model: CB1-HEATsink
Disipador diseñado específicamente para BIGTREETECH CB1, ayudará a mantenerla refrigerada y funcionando sin problemas. Este disipador térmico asegura una óptima disipación de calor, evitando el sobrecalentamiento y posibles daños a tu impresora 3D.Fabricado con metal duradero, el disipador de calor ..
3.25€
Ex Tax:2.69€
New
Stock: In Stock
Model: HDMI5-BTT
BTT HDMI5 is a 5-inch universal HDMI display developed by BigTreeTech.Color screen that provides easy reading. Significantly improves the user experience of Klipper firmware.Thanks to its IPS display panel, it offers exceptional color accuracy with much wider viewing angles and fast response.160° wi..
43.75€
Ex Tax:36.16€
New
Out of Stock
Stock: Out of Stock
Model: HDMI7-BTT
Version: 1.2BTT HDMI5 is a 7-inch universal HDMI display developed by BigTreeTech.Color screen that provides easy reading. Significantly improves the user experience of Klipper firmware.Thanks to its IPS display panel, it offers exceptional color accuracy with much wider viewing angles and fast resp..
58.34€
Ex Tax:48.21€
Stock: In Stock
Model: IO2CAN
IO2CAN adapter module for CB1 / CM4 is an adapter between the general purpose inputs and outputs (GPIO) of Raspberry Pi boards and derivatives, and other common devices such as CANBUS modules and touch screens for Klipper.It's a simple and elegant way to make these connections.All the benefits of th..
12.99€
Ex Tax:10.74€
Only a few units in stock
-20 %
Stock: In Stock
Model: Manta-4MP
Version: 2.2Functions and application:Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0BORE chip, more stable and faster.Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4, definitely, CB1. Also, a screw-reinforced installation is also av..
69.99€ 55.99€
Ex Tax:46.27€
Only a few units in stock
-22 %
Stock: In Stock
Model: Manta-8MP
Version: 1.1Functions and application:Installed with 32-bit 64MHz ARM® Cortex-M0+ STM32G0B1VET6 chip, more stable and faster.Designed with the same connector with Raspberry Pi, giving you a confident connection with all versions of CM4,definitely, CB1. Also, a screw-reinforced installation is also a..
89.99€ 69.99€
Ex Tax:57.84€