Menu
Your Cart

Search

Search Criteria

Products meeting the search criteria

Stock: In Stock Model: MK52-24v
CharacteristicsRated voltage: 24vIncludes strong neodymium magnets that do not lose properties up to 140ºC9 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorNominal power 180w for fast and uniform heatingIt may present some superficial scratches as it has b..
55.99€ Ex Tax:46.27€
Stock: In Stock Model: 3MOS-MKS
MKS 3MOS is a connection fan module. The module integrates 3 MOS control outputs, and its pins and dimensions are compatible with pluggable motor drive slots. It can be used directly by connecting to the drive slot and simply configuring the pin file. Suitable for motherboards with more than 5 axis ..
2.70€ Ex Tax:2.23€
Stock: In Stock Model: Eagle-MKS
MKS Eagle is an integrated version of Nano V3.0. Features:Cortex-M4 with FPU 32-bit, 168 MHz. Flash: 512 KB. RAM: 192KB.Compatible with UBS disk printing and TF card printing.Supports Virtual USB Device function.Integrated 5 TMC2209 driver with UART mode.Integrated snap-on drive heat sink and a..
52.50€ Ex Tax:43.39€
MKS EMMC-8G module and adapter for MKS SKIPR and MKS Pi boards MKS EMMC-8G module and adapter for MKS SKIPR and MKS Pi boards
Out of Stock
Stock: Out of Stock Model: MKS-EMMC-8G
MKS EMMC-8G module and MKS EMMC-Adapter.The EMMC module is more stable and has faster read and write speed than using SD cards.For information about MKS Pi and the configuration click here.For information about MKS SKIPR and the configuration click here...
9.99€ Ex Tax:8.26€
Stock: In Stock Model: MKS IPS50
MKS IPS50 motherboard is a 5 inch capacitive screen. The pixel is 800xRGBx480. It can be connected to MKS SKIPR, MKS Pi board by HDMI and Type C USB interface and also run Klipper screen.It has an integrated DC12-24V power supply interface.Specs:5 inch capacitive screen.Connections: HDMI, TypeC USBP..
47.99€ Ex Tax:39.66€
Stock: In Stock Model: Monster8-V2-MKS
MKS Monster8 V2 is an upgraded version of Monster8 V1. On the basis of retaining the functions of the original V1, has added independent DV5V for the Raspberry Pi, has reserved Robin WIFI interface for RRF firmware, added more protection circuits and reserved more functional interfaces.Specs:MCU: ST..
46.99€ Ex Tax:38.83€
Stock: In Stock Model: MKS-PI
Version: 1.1MKS PI is a high-end microcomputer board designed by Makerbase to replace the Raspberry Pi for the convenience of 3D printing users to use the Klipper firmware. The size, mounting holes, and most interface locations are also compatible with Raspberry Pi 3B. In terms of hardware, MKS PI h..
48.50€ Ex Tax:40.08€
Stock: In Stock Model: MKS Pi_TS35
MKS PI_TS35 is a Makerbase 3.5-inch display developed for the MKS PI board or MKS SKIPR board.For information about MKS Pi and the configuration click here.For information about MKS SKIPR and the configuration click here...
19.99€ Ex Tax:16.52€
Stock: In Stock Model: SKIPR
Version: 1.0MKS SKIPR is an all-in-one board launched by Makerbase for running Klipper. It integrates the RK3328 SOC running the Klipper host and the STM32F407VET6 MCU responsible for executing specific machine actions. It meets the use of most 3D printers.Features and advantages:SOC uses Rockchip's..
79.99€ Ex Tax:66.11€
Stock: In Stock Model: dual-axis-module
Simple complement to connect two motors in parallel, usually used with Z axis, but can be used with any other axis. Recommended to connect two equal motors so that the current is distributed equally between them.Use with small or medium sized 3D printers, avoid large sized motors.Content:1x Boa..
1.25€ Ex Tax:1.03€
Module mosfet 0-24v IRF520 - Arduino compatible Module mosfet 0-24v IRF520 - Arduino compatible
Out of Stock
Stock: Out of Stock Model: mosfet-module
It can control the current of devices or accessories, such as fans, or additional lights.Signal Voltage: 3.3V, 5VOutput voltage: 0-24 VRated current: <5A (To overcome 1A it needs additional dissipation)Size: 33 x 25mm 1 Piece..
1.75€ Ex Tax:1.45€
Nema 17 - 17HS4401s - Tr8x8-300MM - Stepper Motor with trapezoidal spindle Nema 17 - 17HS4401s - Tr8x8-300MM - Stepper Motor with trapezoidal spindle
Out of Stock
Stock: Out of Stock Model: 17HS4401s-T8x8-300MM
Precision motor T8x8 trapezoidal screw integral with the shaft. By eliminating the need for flexible couplings problems of shaft misalignment are eliminated and results in a more compact solution. Specifications:  Shaft length: 300mm  Step : 8mm 1/32  Controller re..
23.99€ Ex Tax:19.83€
Showing 121 to 132 of 227 (19 Pages)