Search

Based on: https://www.thingiverse.com/thing:2228901 Extruder kit content (configurable):Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1 2x Motors Nema 17 - length 40mm - with 1..

Composition:  -Printed parts (ABS)  -MK8 Drive Gear -Bearings:  1 x 608zz  1 x MR105ZZ -Hardware:  4 x M3 Washers  4 x M3 Nuts  1 x M3 25mm  2 x M3 30mm  1 x M3 6mm ..

Advantages:  It can print any material: From PLA, due to it thermical barrier made of stainless steel and its dissipation with forced ventilation, to Nylon, Polycarbonate, Polyoxymethylene y others thermoplastics which need higher temperatures. And also, as it is natural..

The main advantage of this Hotend with respect to the conventional V6 is the change of the heating block and thermistor.It is an encapsulated thermistor, which makes it more resistant to deterioration and breakage.Also, as an insulator, use a silicone sock specially adapted for the heating block. Th..

This teflon tube stands out from others due to lower friction and tighter and more precise tolerances.Features: It is made of polytetrafluoroethylene resin by pressing.Excellent resistance to high and low temperatures: it is not affected by the temperature change, having a wide temperature rang..

This hotend is a simple solution to print parts in two colors or different materials without the characteristic problems of the dual nozzles, such as stains and lags in printing. All material is extruded by the same nozzle, so there are no lags and calibration is simpler and more stable.This version..

This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the heater cartridge a..

CHC series heating block, ceramic and silver-plated copper, which guarantees precise and uniform heating.Compatible with multiple hotends and extruders, such as V5, V6, CR10, Hemera, Matrix etc.Ceramic block, resistant to high temperatures (up to 300ºC).104NT-4 thermistor, TJC8A-M-2P connector. Cabl..

Compact V6 heatsink, can be used for bowden or direct extruders.The internal diameter is 4.2mm, which allows a teflon tube to be inserted up to the throat, thus minimizing friction.Connections:M7 Bottom - Compatible with V6 style throats..