These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. 8mm inner diameter for use with planetary gear motor. Nominal measures: Inner diameter 8mm External diameter 12.64mm Effective diameter 10.8mm ap..
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. Material: stainless steel ..
These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth always guarantee a steady grip. Material: stainless steel 1 Piece ..
These precision pulleys are designed especially for the extrusion
of the filament, its tiny teeth always guarantee a steady grip.
Material: stainless steel ..
These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..
These nozzles perform the function of extruding melted plastic in the 3D printing process.The Teflon coating prevents filament from adhering to the tip.Features:Output tolerance: ±0.005 - 0.01mm.Roughness: <= Ra 0.2 / 3.2.High quality material.The inner wall is smooth and without blurrs.Sandblast..
Orbiter V2.0 Extruder (1.75mm)The Orbiter V2.0 extruder gears are different from the V1.5 gears.Characteristics:Shorter drive gears: 11mm vs. 15mm.Strand gears hardenedWeight reduced to 135 grams approx.Smaller and more compact dimensions (11.6% shorter).The new motor design offers a ~40% increase i..
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
These nozzles are designed to achieve the best performance at high temperatures.Made from a special high-temperature copper alloy with a softening point well above 500 ° C, and with much higher thermal conductivity, these silver-plated copper nozzles are perfect for high-temperature applications, wh..
Teflon tube with internal diameter 1.9mm, for 1.75mm filament.The inner walls of the tube are very smooth, which guarantees a high control over the flow.Due to its internal diameter of 1.9mm it is used for direct extruders, not recommended for use in bowden extruders.Features: It is made of pol..
Rockwool Thermal insulation is used for heater block of the
Hotend, helping to maintain the temperature. Thermal behaviorThe structure of the rockwool contains dry and stable air
inside, which acts as a barrier to heat transfer characterized by its low thermal
conductivity, which i..
Double pulleys for bondtech extruders, this filament thrust system has proven to be one of the most powerful and reliable. By exerting force on the filament on both sides it is capable of transferring twice as much force as a single pulley, decreasing the possibility that the filament rests on the p..