Fusion zone extender to increase hotend flow.It is installed between the heating block and the nozzle, simply and quickly, thus increasing the volumetric flow of your 3D printer, I can print faster.It achieves an increase in flow of 40% approximately.Material: plated copper...
Plate to fix 20 x 20 aluminum profiles, with "L" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
Plate to fix 20 x 20 aluminum profiles, with "T" shaped holes facilitates and reinforces the assembly of structures that with 2020 profiles (3D printers, CNC machines, among others).Material: Aluminum AlloyNumber of holes: 5Does not include bolts or nuts.1 unit...
High temperature PT1000 temperature sensor.They are capable of measuring higher temperatures than thermistors (up to 400-450ºC, compared to 300ºC for the thermistor), and are more accurate than thermistors and thermocouples in general.PT1000 sensors can directly replace your printer thermistors with..
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degrees clockwise and is positioned and fixed, resulting in a simple and convenient installation.Dimensions:
D
L
H
..
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degrees clockwise and is positioned and fixed, resulting in a simple and convenient installation.Dimensions:
D
L
H
..
T-nut or hammer shaped, is one of the most used in the aluminum profile system.It is inserted by the profile directly into the slot, rotates 90 degrees clockwise and is positioned and fixed, resulting in a simple and convenient installation.Dimensions:
D
L
H
..