The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
Red and black wires for the heated bed. Red and black cables for the heated bed. One end of each cable has a connector crimped for the connection to the Ramps.This cable is used in our 3DSteel and P3Steel, it is also compatible with other 3D printer models of similar format.It is a tinned copper cab..
It can be glued on a hot bed, such as the Mk3, and on this magnet can be placed the different magnetic sheets that exist on the market, such as those coated with PEI powder.They are made of a material that can be easily worked, perforated or cut with scissors and cutter to adapt to the screws of any..
Features:Rated voltage: 24VIncludes strong neodymium magnets that do not lose properties up to 140ºC4 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorFast and uniform heatingIt may present some superficial scratches as it has been manipulated for the welds..
Features:Rated voltage: 24VIncludes strong neodymium magnets that do not lose properties up to 140ºC4 fixing holes for countersunk screwsPre-welded power cablesThermistor included with connectorFast and uniform heatingNominal resistance: 1.6 ohmsNominal power 360WMounting hole spacing: 240mm for M4 ..
This is a tough thin plastic film that adheres to the printing base or hot bed.It is designed with a special material in which the printed pieces adhere very tightly, plus its finely rough texture helps. Once the printing is finished, the piece is removed without leaving any residues or marks. No la..
MK2b Heated Bed 300x200mm
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing. Thus the
warping (parts bulge and come off during printing process) is
avoided.
More information: http://reprap.org/wiki/PCB_Heat..
The hot bed is responsible for heating the bottom of the 3D
printer, so that the pieces remain adhered during printing.Thus the
warping (parts bulge and come off during printing process) is
avoided.More information:http://reprap.org/wiki/PCB_Heatbed..