This nut is used to facilitate manual leveling of the hot bed, since only the nut needs to be turned to tighten or loosen the screw.Specifications:Larger diameter: 10.75 mmWidth: 6.10 mmFor M3 screwMinimum order: 4 units1 unit..
These clamps are used to fix the glass to the heated bed, they are small and can be easily removed.They are designed to take up as little space as possible on the printing surface, thereby optimizing the printing area.Material: Stainless steelWeight: 2.6g1 unit..
HEPA and activated carbon filters prevent the release of potentially harmful particles and fumes into the air, ensuring a safe environment for people around the printer.Size: 19 x 4.5 x 1 cm approx.More info about Nevermore filters here...
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of the right angle corner.Specifications:Material: aluminum alloyColour: GreySize: approx. 2 x 2 x 1.7 cm approx.Elliptical hole: approx. 0.9 x 0.6 cm..
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of the right angle corner.Specifications:Material: aluminum alloyColour: Grey1 unit..
Square connector with elliptical orifice for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of the right angle corner.Specifications:Material: aluminum alloyColour: GreySize: approx. 3.4 x 3.4 x 2.9 cm approx.Elliptical hole: approx. 17 x 6 cm app..
Square connector for aluminum profiles.Made of aluminum, it is durable and versatile. It is used to reinforce the inside of the right angle corner.Specifications:Material: aluminum alloyColour: Grey1 unit..
It is commonly used to increase performance in Hotends All metal , is applied between the throat and the heat sink. Pre - applied in our hotend V6. Specifications: White colour Operating temperature: -50/180°C Evaporation : < 0.001 % Thermal Conductivity: >1.22 W/..