Search

M6 threaded nozzle for Volcano hotend.Diameter: 0.4mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..

M6 threaded nozzle for Volcano hotend.Diameter: 0.5mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..

M6 threaded nozzle for Volcano hotend.Diameter: 0.6mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..

M6 threaded nozzle for Volcano hotend.Diameter: 0.8mmGolden colourmaterial: brassFor 1.75mm filamentThread: M6..

Fusion zone extender to increase hotend flow.It is installed between the heating block and the nozzle, simply and quickly, thus increasing the volumetric flow of your 3D printer, I can print faster.It achieves an increase in flow of 40% approximately.Material: plated copper...

High temperature PT1000 temperature sensor.They are capable of measuring higher temperatures than thermistors (up to 400-450ºC, compared to 300ºC for the thermistor), and are more accurate than thermistors and thermocouples in general.PT1000 sensors can directly replace your printer thermistors with..

V6 bimetal throat, with M6 and M7 thread.Throat made of titanium and copper, two metals with different thermal conductivity to achieve better performance and resistance. The titanium reduces the conduction of heat upwards in the heating position and the copper effectively dissipates heat achieving b..

V6 bimetal throat, with M6 and smooth 7mm diameter.Throat made of titanium and copper, two metals with different thermal conductivity to achieve better performance and resistance. The titanium reduces the conduction of heat upwards in the heating position and the copper effectively dissipates heat a..

Titanium is a material with excellent mechanical and thermal properties, which allows us to offer a throat with the following advantages:Thanks to its excellent machinability and super-precise production process this throat has very tight tolerances.Its interior finish is mirror effect, which favors..

V6 Dual Heatsink compatible with bowden system Features: Compatible with V6 components, such as nozzles and heater block. It can be configured for two different temperatures on each end, so multiple materials can be printed. Easy leveling system for the nozzle. Light and com..

The V6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor in place. These design improvements improve the thermal response of the HotEnd and make thermistor assembly easier.This product also comes with the following fixings:M3x0.5x4 socket dome screw and..