It is one of the most popular stepper motor controllers, its high performance and low cost makes it ideal for any 3D printer or CNC that use currents lower than 2A.Characteristics: Low resistance Short circuit and overheat protections Rated current 2A Step modes: 1/16, 1/8, 1/4, ..
Nema 17 motor cable.It has XH2.54 DuPont on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 0.5 meters1 unit..
Nema 17 motor cable.It has XH2.54 DuPont on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 1 meter1 unit..
Nema 17 motor cable.It has XH2.54 connector on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 0.5 meters1 unit..
Nema 17 motor cable.It has XH2.54 connector on one end and JST PH2.0mm connector on the other (for motor).Material: silicone rubber, plastic and metalLength: 1 meter1 unit..
The DRV8828 is a driver for stepper motors, with a resolution of 1/32 steps. Datasheet: https://www.pololu.com/product/2133 Heatsink included with thermal tape1 Piece ..
Precision motor T8x8
trapezoidal screw integral with the shaft. By eliminating the need
for flexible couplings problems of shaft misalignment are eliminated
and results in a more compact solution. Specifications:
Shaft length: 300mm
Step : 8mm 1/32
Controller re..
Precision motor T8x8
trapezoidal screw integral with the shaft. By eliminating the need
for flexible couplings problems of shaft misalignment are eliminated
and results in a more compact solution. Specifications:
Shaft length: 310mm
Step : 8mm 1/32
Controller re..
Precision motor T8x8
trapezoidal screw integral with the shaft. By eliminating the need
for flexible couplings problems of shaft misalignment are eliminated
and results in a more compact solution. Specifications:
Shaft length: 350mm
Step : 8mm 1/32
Controller re..
Precition motor with great power, its 5.18 to 1 relation multiplies the motor strength, which makes it ideal for bowden extruders, or any other system that needs big strength and precisition at slow turn speeds. The number of complete steps per revolution is 1036.Specifications: ..
Features:Nema14 motor, small in size, light in weight and high in quality.High temperature resistant.Long service life, up to 30,000 hours.Step Angle: 1.8±5%/StepCurrent: 1.88A/PHASENumber of teeth: 10 teethWeight: 83gSize: about 51x36x23mmLead wire length: 4CM/1.57inExtension cable: 70cm1 piece&nbs..
Features: Each motor includes 1 meter of wire with dupont connector at its end. Nominal electrical specifications:ModelStep Angle (deg)Motor Length (mm)Rated Current (A)Phase resistence (ohm)Phase inductance (mH)Holding Torque (N·cm min)Detent Torque (N·cm max)Rotor Inercia (g·cm2)Number o..