Thermistor 100K ohm NTC 3950 wired

MK2B HeatBed 200x200mm 12v / 24v - Red or black

-50%

The hot bed is responsible for heating the bottom of the 3D printer, so that the pieces remain adhe..

17.99€ 8.95€

text_tax7.40€

MK2b SB 12v / 24v Black heatbed - Back colour - Staticboards

-28%

MK2b SB 12/24v Black heatbed - Back colourMK2B heated bed in black with welds for thermistor (i..

19.99€ 14.49€

text_tax11.98€

Heater Cartridge - Heater TN2F 12V 40W

-63%

Heater TN2F 12V 40W Power: 40W Material: Stainless Steel Core: Ceramic Diameter..

3.20€ 1.20€

text_tax0.99€

-54%

All features similar to MK2, you can also operate this board with 12 Volt or 24 Volt Heatbed wi..

25.99€ 12.00€

text_tax9.92€

Dupont Cable 1P Male to Male - 15cm

Out of Stock

Dupont Cable 1P Male to Male 15 cm aprox 1 Piece. If you buy more than one, we will s..

0.25€

text_tax0.21€

Thermal Insulation for Heated Bed

-20%

Thermal Insulation for Heated Bed 1 Piece..

2.50€ 1.99€

text_tax1.64€

-9% Out of Stock

MK2A Heatbed 300x200mm

MK2b Heated Bed 300x200mm The hot bed is responsible for heating the bottom of the 3D printer, so ..

32.99€ 29.99€

text_tax24.79€

Bipolar wire - 1mm2 section - 1 meter length

The price is for 1 meter, if you want consecutive meters we can offer up to 10 meters...

0.59€

text_tax0.49€

ALU Heatbed MK3 300x200 12v

-50%

All features similar to MK2 12 Volt.Heatbed with 3mm aluminum core. You can print directly on the he..

49.99€ 25.00€

text_tax20.66€

-52%

Bearings LM8UU stardard, which are used in reprap printers for the linear movement using smoth ribs ..

1.20€ 0.58€

text_tax0.48€

Mega 2560 R3 (Compatible)

-31%

The Arduino Mega 2560 is a microcontroller board based on the ATmega2560 .It has 54 digita..

17.99€ 12.50€

text_tax10.33€

-43%

Fan Specifications 3010Size: 30x30x10mm7 bladesConnector: pHNominal Current: 0.08 ± 10% AmpRate..

3.00€ 1.70€

text_tax1.41€

-8% Out of Stock

8010 Fan

Fan Specifications 8010 Size: 80x10mm 11 Blades Connector: XH2.54-2P Nominal cur..

7.25€ 6.69€

text_tax5.53€

-61%

Bearings 608zz standard, which are used in printers in the extruder “Greg’s wade” and its derivative..

0.99€ 0.39€

text_tax0.32€

-48%

MK8 for 1,75mm filament

These precision pulleys are designed especially for the extrusion of the filament, its tiny teeth al..

3.45€ 1.80€

text_tax1.49€

Nema 17 Stepper Motor - 17hs4401 - 5mm D Shaft

-37%

Features:17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CN..

15.75€ 9.90€

text_tax8.18€

Bowden Connector BSP PC4-M6 for 1.75mm filament

-51%

It is used to connect hotends and extruders to teflon pipe. On one it side has a M6 thread and ..

3.99€ 1.95€

text_tax1.61€

-35%

Composition: 2x 375mm Smooth rod 2x 350mm Smooth rod ..

25.99€ 17.00€

text_tax14.05€

Dupont Cable 4P Female to Female - 70cm

-17%

Dupont Cable 4P Female to Female They are used for Stepper Motors 70 cm aprox 1 Piece..

1.20€ 0.99€

text_tax0.82€