V6 Dual Hotend - Chimera Style - 1.75mm filament

V6 Dual Hotend compatible with bowden system 


Features: 

  • Compatible with V6 components, such as nozzles and heater block. 

  • It can be configured for two different temperatures on each end, so multiple materials can be printed. 

  • Easy leveling system for the nozzle. 

  • Light and compact, only 18mm spacing between nozzles. 

  • Assembled in Spain. 


Content (Assembled):

  • Heater block 30x30mm

  • 2x  Bowden BSP PC04-1 Connectors

  • 2x Throats

  • 2x V6 Heater blocks

  • 2x V6 Nozzle

  • 2x wired Thermistor + DuPont connector

  • 2x 12v 40w Heater

  • 1x  12v  3010 Fan

Write a review

Note: HTML is not translated!
    Bad           Good

  • Views: 7123
  • Product Code: V6Dual-Full
  • Availability: In Stock
  • 96.80€
  • 37.75€
  • Ex Tax: 31.20€

Available Options

Tags: Assembled Hotend, Extruder,

Hotend Dual Configuration, it is the element that melts the filament. As it is dual, you can choose a configuration for each hotend or the same for both: 

Nozzle, it the extreme of the extruder, and defines the thickness of the filament being extruded: 

We offer a wide range to choose from for your application, nozzles around 0.4mm are the most popular choices. Smaller diameters provide higher resolution and larger diameters print faster and stronger parts

Nozzle, it the extreme of the extruder, and defines the thickness of the filament being extruded: 

We offer a wide range to choose from for your application, nozzles around 0.4mm are the most popular choices. Smaller diameters provide higher resolution and larger diameters print faster and stronger parts

Related Posts - HTA3D Blog
Cool Pull or Atomic Method: How to clean the nozzle of our 3D Printer

Cool Pull or Atomic Method: How to clean the nozzle of our 3D Printer

Fátima 19/06/2018 0
Cool Pull or Atomic Method to clean the nozzle of our 3D Printer  Cool Pull or Atomic Method is a technique to clean the nozzle. It can be done after a jam, or as a preventive cleaning after a change of material or many hours of printing.  With the Atomic Method technique, we can extract residues and/or burnt particles of filament from the nozzle t...
Read More
P3Steel Dual Launch - Dual Prusa I3 Steel

P3Steel Dual Launch - Dual Prusa I3 Steel

Juan J 29/03/2017 4
Many of you have asked us for a Dual P3steel kit, and today is the day: we have designed this kit for you. It is based on our popular P3steel, we have taken care of every detail in order to offer an easy assembled kit and easey to use, as well as very realiable.   Among its features we point out:  It is assembled with the same frame we use for our ...
Read More
The Hotend - Functioning and Zones

The Hotend - Functioning and Zones

Juan J 26/08/2016 0
 The Hotend is the element of the 3D printer which function is to melt the filament.   The filament is introduced in solid state into one end and it is extruded by the opposite end in a controlled manner.  There are many different types on the market, but they all have three zones in common that we can identify as: Cold End:  It is the zone in char...
Read More