We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

Wilson Printed Parts + Movement Kit + Special Hardward Set / MK7

-40% Wilson Printed Parts + Movement Kit + Special Hardward Set / MK7

WILSON ABS PRINTED PARTS KIT 

Important: Due to the development of this design the pieces will be printed after the payment realization, to always send the latest version available in the official repository: 

https://github.com/mjrice/wilson 


Printed Parts: 

- Extruder Option: 
Direct drive extruder to be used with MK7 (ABS) 
Optional  Geared extruder to be used with hobbed bolt (ABS) and Gears 


- Fan duct (ABS) 
- X Axis ends (ABS) 
- X axis carriage  (ABS) 
- X axis tensioner (ABS)
- Z axis endstop holder (ABS)
- 2x Belt guides for 624zz bearings (ABS)
- 4x Y axis bearing holders for lm8uu bearings (ABS)
- Y axis belt holder (ABS)
- Y motor (PLA)
- Y idler (PLA)
- 4x Frame bracket (PLA)
- 2x Z motor holders - Reinforced version (PLA)
- 4x Rod holders (PLA)
- 2x Rear bracket (PLA)

You can choose the colour, otherwise, we will ship them in any available colour. 



Movement kit:


12x LM8UU linear bearing
3x 608zz Angular Bearings (only for geared version)
2x624zz bearings for geared / 4x624zz bearings for Direct Drive
2x 5x5mm Coupler shaft
2m GT2 Belt, Made of neoprene , fiberglass reinforced
2x 20 teeth aluminium timing pulley


Special Hardware set 


Hobbed bolt for Geared Version
MK7 for Direct Drive Version
2x M3x40 Partially treated bolts with spring
M8x20 stud for extruder idler for Geared Version
M3x10 stud small gear for Geared Version
2x M5 Nylon nut for Z axis movement, great improvement. Nylon has an excelent abrasion resistance, also provides a more soft and reliable z movement.


You can buy one of our Hotends, with discount for this kit. 

Write a review

Note: HTML is not translated!
    Bad           Good

Quality:
 

All our kits are printed with high quality materials, producing very strong and durable parts.

  • Dimensional:

The gears are completely round and the teeth fit deeply.

  • ​Infill:

​All pieces have an approximately infill of 40% plus a minimum perimeter of 1 mm (lower, upper and sides).

  • Superficial:

All parts are inspected after being printed in order to look for flaws. They have, as it is natural, the characteristics of the 3D printing process.

 

Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 3059
  • Brand: HTA3D
  • Product Code: Wilson-Movimiento
  • Availability: In Stock
  • 112.75€
  • 67.95€
  • Ex Tax: 56.16€

Available Options

Tags: Printed Parts + Movement Kit, Saving Kits,