We use own and third party cookies, for the analysis of user navigation. If you continue browsing, we consider that you accept their use. You can change the settings or get more information here.

WILSON STRUCTURE: Aluminium Profiles + Rods + Nuts and Bolts + Printed Parts + Movement Kit + Special Hardward Set / MK7

-18% WILSON STRUCTURE: Aluminium Profiles + Rods + Nuts and Bolts + Printed Parts + Movement Kit + Special Hardward Set / MK7

WILSON STRUCTURE: Aluminium Profiles + Rods + Nuts and Bolts + Printed Parts + Movement Kit + Special Hardward Set / MK7


Important: Due to the development of this design the pieces will be printed after the completion of payment, to always send the latest version available in the official repository:

https://github.com/mjrice/wilson



THIS KIT CONTAINS:

-The aluminium Profile, Rods and Nuts and Bolts you will need to built your 3D Printer Wilson.
-All Printed parts that you will need to build your 3D Printer Wilson.
-All Bearings, belts, pulleys and flexible couplings that you will need to build your 3D Printer Wilson.
-The Special hardware you'll need for this project and that hardly find in hardware stores or unspecialized shops.


1. ALUMINIUM PROFILES AND RODS:

Aluminium Profiles:

  • 2x 400mm: Vertical Frame 

  • 2x 330mm: Horizontal Frame 

  • 2x 400mm: Y Axis

M8 Smooth stainless steel rods :

  • 2x 370mm:  X Axis

  • 2x 400mm:  Y Axis

  • 2x 350mm:  Z Axis


M5  Stainless steel threaded rods:

  • 2x 325mm:  Z Axis 

Quality:

Smooth rods are calibrated and made of stainless steel, ideal to be used with LM8UU bearings.

M5 threaded rods are made of stainless steel for a high durability and accuracy (they are more rigid than galvanized or similar).

The cutting is done by hand, so that the meassure can be slightly higher (+ 1mm or similar) not lower.

All rods are shipped without burr and the edges filed down properly.



2. MDF:

Dimensions: 230x230x7mm; 

Weight: 335g



3. PRINTED PARTS 

Important: Due to the development of this design the pieces will be printed after the completion of payment, to always send the latest version available in the official repository:

https://github.com/mjrice/wilson

- Extruder Option:
Direct drive extruder to be used with MK7 (ABS)
Optional  Geared extruder to be used with hobbed bolt (ABS) and Gears


- Fan duct (ABS)
- X Axis ends(ABS)
- X axis carriage (ABS)
- X axis tensioner (ABS)
- Z axis endstop holder (ABS)
- 2x Belt guides (624zz) (ABS)
- 4x Y axis bearing holders (lm8uu) (ABS)
- Y axis belt holder (ABS)
- Y motor (PLA)
- Y idler (PLA)
- 4x Frame bracket (PLA)
- 2x Z motor holders - Reinforced version (PLA)
- 4x Rod holders (PLA)
- 2x Rear bracket (PLA)

Quality:

All our kits are printed with hight quality ABS/PLA, producing that whay very strong and durable parts.

- Dimensional
The gears are completely round and the teeth fit deeply, bolt holes only need a bit of cleaning or no cleaning at all in most cases. 

- Filling
All pieces have a approximately fill of 40% plus a minimum perimeter of 1mm (lower, upper and sides).

- Superficial
All parts are inspected after being printed in order to look for flaws. They have as it is natural the characteristics of the 3D printing process.
 

You can choose the colour, otherwise, we will ship them randomly.



4. MOVEMENT KIT:

-12x LM8UU linear bearing
-3x 608zz Angular Bearings (only for geared version)
-2x624zz bearings for geared / 4x624zz bearings for Direct Drive
-2x 5x5mm Coupler shaft
-2m GT2 Belt, Made of neoprene , fiberglass reinforced
-2x 20 teeth aluminium timing pulley



5. SPECIAL HARDWARE SET 

-Hobbed bolt for Geared Version
-MK7 for Direct Drive Version
-2x M3x40 Partially treated bolts with spring
-M8x20 stud for extruder idler for Geared Version
-M3x10 stud small gear for Geared Version
-2x M5 Nylon nut for Z axis movement, great IMPROVEMENT. Nylon has an excelent abrasion resistance, also provides a more soft and reliable z movement.



6. NUTS AND BOLTS:

 -51x M5x8
-51x  M5 T Slot Nuts 
-4x M5 T Slot Nuts (They can be inseted after the mounting)
-2x M5 Nuts
-7x M4x20 + 7x M4 Nuts
-11x M3x10
-24x M3x14 (Black and allen)
-10x M3x30
-18x M3 Nuts 
-13x M3 Lock Nut 
-17x M3 washers 
-6x M2x15 mm + 6x M2 Nut 

Extra:

  • 4 x  Springs for heatedbed 


IN ADDITION: 3x Mechanical Endstop KW12-3



You can buy one of our Hotends, with discount for this kit. 



Write a review

Note: HTML is not translated!
    Bad           Good

Custom products

This product is prepared according to the customer requirements, thus, the handling time is between 24 and 48 hours approximately.

  • Views: 5502
  • Brand: HTA3D
  • Product Code: Wilson-Estructura
  • Availability: In Stock
  • 165.00€
  • 134.90€
  • Ex Tax: 111.49€

Available Options

Tags: Frame + Rods + Fasteners + Printed Parts, Saving Kits,

Related Posts - HTA3D Blog
Compilation of useful links for 3D printing

Compilation of useful links for 3D printing

Juan J 10/03/2017 0
It is usual that new 3D printing users feel overwhelmed by the quantity of information we can find on Internet. There is a lot of  high quality information, but it is also quite easy to get lost and feel confused. On the other hand, advanced users may discover interesting things in these links. We will try to keep updated these links. And also, we ...
Read More