Search Criteria
Products meeting the search criteria
Out of Stock
Stock: Out of Stock
Model: Cristal bor- 3mm 300x200
The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..
8.50€
Ex Tax:7.02€
Stock: In Stock
Model: Brass-V6-Heater-Block-PT100
This material is more resistant and has a higher thermal inertia, so we can tighten the nozzle more without passing the thread, and having a higher thermal inertia the temperature will remain much more stable during printing.The v6 Heater Block has been upgraded to clamp both the
heater cartridge a..
4.85€
Ex Tax:4.01€
Out of Stock
Stock: Out of Stock
Model: Inserto-M3
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.29€
Ex Tax:0.24€
Stock: In Stock
Model: Inserto-M4
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.34€
Ex Tax:0.28€
Stock: In Stock
Model: Inserto-M5
Brass (copper alloy) insert nuts, are especially suitable for thermoplastic materials.Threaded inserts are designed to provide strong permanent threads in thermosets and other hard plastics and are commonly used on plastic parts.They are commonly used in 3D printers, such as Voron.Material: Brass, w..
0.38€
Ex Tax:0.31€
Stock: In Stock
Model: BTT-CB1
Version: 2.2CB1 outputs signals to the motherboard through the micro BTB two-pin connection, including 100M Ethernet, HDMI, etc. Also, built-in 2.4G Wi-Fi. With its powerful 64-bit ARM Quad Core processor and 1 GB of DDR3 RAM, it has enough power to run Klipper, Linux or Debian.Compatible with Manta..
36.75€
Ex Tax:30.37€
New
Stock: In Stock
Model: BTT Micro Probe
Main features:Ultra small, fits into more places.Lighteweight desing.Easy installation.Compatible with wide range of FDM printers.High precision and reliability.Specifications:Name: MicroProbe.Total weight: 6g.Voltage: 5V.Standard-By current: 19mA.Operating Current: 350mA.Cable Length: 1.5m.Wiring: ..
24.99€
Ex Tax:20.65€
New
Out of Stock
Stock: Out of Stock
Model: BTT-Pi
Version: 1.2Features:Strategic Partnership KLIPPER and BIGTREETECH - The cooperation between KLIPPER and BIGTREETECH makes firmware for 3D printing enthusiasts more convenient to use and helps to further enhance the printing experience.Efficient and Powerful - 64-bit Quad-Core Architecture │ ARM®Cor..
34.99€
Ex Tax:28.92€
Only a few units in stock
-14 %
Stock: In Stock
Model: BTT02-V1.0
The BTT02 V1.0 board is a versatile board, which can be used as a replacement for the Prusa I3 MK3S printer board (Einsy Rambo board).Specifications:Microprocessor: 168MHz ARM Cortex-M4 CPU with STM32F407VGT6 chipVoltage: 12 / 24VLogic voltage: 3.3VMotor Drivers: 5 (including double Z)Engines: XM, Y..
69.99€ 59.99€
Ex Tax:49.58€
Stock: In Stock
Model: 12AWG-negro-1m
It is a tinned copper 12 AWG cable resistant to high temperatures. With silicone protection, it is very flexible.Length: 1 meterSection: 3.31mm²Diameter: 2.25mmColour: black..
2.15€
Ex Tax:1.78€
Stock: In Stock
Model: 12AWG-rojo-1m
It is a tinned copper 12 AWG cable resistant to high temperatures. With silicone protection, it is very flexible.Length: 1 meterSection: 3.31mm²Diameter: 2.25mmColour: red..
2.15€
Ex Tax:1.78€
Stock: In Stock
Model: Cable-12AWG-70cm-01
Red and black wires to power the RAMPS from the power supply.It is a tinned copper cable resistant to high temperatures. With silicone protection, it is very flexible.One of the ends is welded to facilitate the introduction of the cable into the RAMPS connector.Length: 70cmSection: 3.31mm²Diameter: ..
2.75€
Ex Tax:2.27€