3d Printing Surface

Foam thermal insulation for hot bed. It is also a strong acoustic insulator, with great absorption and damping performance.Recommendations:Clean the surface you want to paste it on.Make the insulation and the base fit tightly.Do not cover the holes in the hot bed with insulation.Protect wiring and c..

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..

The borosilicate glass has a coefficient of expansion of approximately one third of ordinary glass, it makes it more durable than other glasses to thermal shock. The borosilicate glass has a density of 2.23 g / cm3 lower than the ordinary glass (2.57g / cm3). These properties make it ideal..

This is a tough thin plastic film that adheres to the printing base or hot bed.It is designed with a special material in which the printed pieces adhere very tightly, plus its finely rough texture helps. Once the printing is finished, the piece is removed without leaving any residues or marks. No la..

This printing base is a glass with microporous coating that increases adherence. Also, you do not need clamps for placement.Features:Great adhesion: it is covered by microporous coating, which has an adhesion during printing. Once it cools, it's easy to take off.Superplanitud of surface, f..

It can be glued on a hot bed, such as the Mk3, and on this magnet can be placed the different magnetic sheets that exist on the market, such as those coated with PEI powder.They are made of a material that can be easily worked, perforated or cut with scissors and cutter to adapt to the screws of any..

Usage:It is possible to print directly on it, but we recommend to use the antiwarping adhesive film for a better performance. Before gluing this film, wipe it with a cloth to remove any stains and make sure that the film sticks correctly.If you only use lacquer on the upper side, the result will be ..

MK3 aluminum and glass with microporous coating.The heated bed is an evolution of the conventional 3mm MK3 hot bed, being more powerful and lightweight, it has been designed to be used with the microposoro coating.It has similar characteristics to MK2, for 12 volts:Heated bed with 1.5 mm aluminum co..