Only a few units in stock
-12 %
Stock: In Stock
Model: MK3-400-24V+
400 × 400 mm aluminium-core MK3 heated bed for large-format 3D printers. It is 3 mm thick, operates at 24 V and is rated at approximately 260 W. A roughly 90 cm cable and 100 kΩ temperature sensor are fitted.Nominal current is approximately 10.8 A and equivalent resistance about 2.22 Ω. Mounting cen..
62.00€ 54.50€
Ex Tax:45.04€
Only a few units in stock
-7 %
Stock: In Stock
Model: MK3-500-24V+
500 × 500 × 3 mm aluminium MK3 heated bed for large-format 24 V FDM projects. Rated power is approximately 280 W; nominal current is about 11.7 A and equivalent resistance about 2.06 Ω. It includes roughly 90 cm of wiring and a 100 kΩ sensor.Weight is approximately 2105 g. Mounting centres are 460 m..
73.50€ 68.50€
Ex Tax:56.61€
-56 %
Stock: In Stock
Model: Mk3 214x214
214 × 214mm MK3 ALU heated bed based on the open RepRap architecture, with a 3mm aluminium core and a circuit selectable for 12 or 24V DC. Its classic format suits many Prusa i3, P3Steel, 3DSteel and other RepRap projects when the carriage, holes and electrical system match.
Four corner positions..
24.99€ 10.90€
Ex Tax:9.01€
Stock: In Stock
Model: Mk3-220x220-12/24v
220 × 220mm MK3 ALU heated bed with a 3mm aluminium core and a heater circuit selectable for 12 or 24V DC. The bare metal face provides a rigid surface while the black underside carries the heater circuit, thermal warnings and connection pads.
Four countersunk mounting holes allow screw heads to ..
11.99€
Ex Tax:9.91€
-20 %
Stock: In Stock
Model: MK3-220x220-12v-C
220 × 220mm MK3 ALU heated bed prepared for 12V operation at approximately 96W. It includes an approximately 90cm harness, power connection and installed thermistor, avoiding the need to solder the main wiring directly to the plate.
The 3mm aluminium core provides rigidity and distributes heat, w..
15.99€ 12.80€
Ex Tax:10.58€
Stock: In Stock
Model: Mk3-220x280-12v
220 × 280mm, 12V MK3 ALU heated bed providing a longer build platform while retaining a declared 209mm corner-hole pattern dimensionally compatible with many RepRap carriages designed around 214 × 214 or 220 × 220mm beds.
The plate has a 3mm aluminium core, four corner holes, one centre hole on e..
19.99€
Ex Tax:16.52€
Stock: In Stock
Model: Mk3-329x329-24V
329 × 329mm MK3 ALU heated bed for 24V systems, with a declared 300 × 300mm effective area. It is intended for large-format printers and custom projects using a 320mm square mounting pattern.
The 3mm aluminium core combines the structural surface and heater circuit. Four corner holes and a front ..
29.99€
Ex Tax:24.79€
Stock: In Stock
Model: Mk3-235x235-24V
MK3 ALU 235 × 235 mm heated bed for 24 V systems, built on a 3 mm aluminium plate and rated at 240 W. Its four countersunk mounting holes allow flat-head screw heads to sit flush with the top surface.
This version is supplied without wires or a fitted thermistor. It provides large connection pads..
13.50€
Ex Tax:11.16€
Stock: In Stock
Model: Mk3-235x235-24V-connection
MK3 ALU 235 × 235 mm heated bed for 24 V systems, built on a 3 mm aluminium plate and rated at 240 W. It has four countersunk holes on a nominal 170 mm mounting pattern and includes an approximately 90 cm detachable connection harness.
This version reduces wiring preparation, but it remains a hig..
16.49€
Ex Tax:13.63€
Showing 1 to 9 of 9 (1 Pages)