-23 %
Stock: In Stock
Model: 3DLAC
3DLAC is a Spanish-made aerosol adhesive designed to improve first-layer adhesion to the printing surface. It helps reduce corner lifting and warping when printing materials such as PLA, ABS, PETG, Nylon and TPU, provided that the bed, temperature and first-layer settings are correctly adjusted.
..
7.50€ 5.80€
Ex Tax:4.79€
-14 %
Stock: In Stock
Model: 3DLAC Plus
3DLAC Plus is a concentrated adhesive designed to improve first-layer adhesion in 3D printing. Its 100ml spray-bottle format provides controlled application without using a pressurised aerosol.
It is particularly intended for demanding materials and prints requiring stronger adhesion, including A..
6.50€ 5.60€
Ex Tax:4.63€
Stock: In Stock
Model: 3DLAC Stick
3DLAC Stick 80 ml is a 3D printer build-plate adhesive with a sponge applicator. It makes it easy to spread a thin coating only where the model will be printed, without aerosol overspray and with particularly convenient control for small or localised prints.
Its water-based, alcohol-free formula ..
4.35€
Ex Tax:3.60€
Only a few units in stock
-7 %
Stock: In Stock
Model: 3DNylon
3DNYLON 30 ml is a brush-on adhesive specifically developed to improve the first layer when printing nylon or polyamide (PA) filaments. It helps keep the part attached to the bed and reduce corner lifting, a common challenge with this material.
The applicator makes it possible to spread a thin, eve..
21.00€ 19.50€
Ex Tax:16.12€
Stock: In Stock
Model: 4x-clip
This set of four reversible metal clamps is designed to securely hold print surfaces such as glass or build plates onto a heated bed. Their compact design minimizes interference with the print area while allowing quick installation and removal whenever needed.
Features
Set of 4 reversibl..
0.99€
Ex Tax:0.82€
Out of Stock
Stock: Out of Stock
Model: Clip-cristal
Black metal clip with a knurled adjustment screw for securing glass and other removable rigid build surfaces to a 3D printer heated bed.
The U-shaped body fits over the edge of the bed, while the screw allows the clamping pressure to be adjusted. Its compact design occupies little space on the bu..
3.75€
Ex Tax:3.10€
Stock: In Stock
Model: Base Adhesiva Antiwarping
Matte-Style Anti-Warping Adhesive Sheet for 3D Printing
Thin adhesive sheet with a slightly textured surface to improve first-layer adhesion. It can help reduce part movement and corner lifting when the surface, temperature and first layer are correctly adjusted.
It can be applied directly to MK3-..
3.15€
Ex Tax:2.60€
Stock: In Stock
Model: Aislante-Térmico
This thermal insulation pad is designed to reduce heat loss from the underside of a heated bed, improving thermal efficiency and helping maintain a more stable printing temperature.
Features
Multi-layer thermal insulation structure.
Reduces heat loss from the heated bed.
Helps ..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: Adhesive-Foam
Self-adhesive thermal insulation for the underside of a heated bed, combining a foam layer, an aluminium-finished surface and an adhesive backing. Its nominal format suits many square 3D-printer beds, provided that their dimensions, mounting holes and cable position are checked first.
By reducing..
1.95€
Ex Tax:1.61€
Stock: In Stock
Model: Pinza-abrazadera
Stainless steel spring clip designed to secure a removable glass, mirror or other rigid build surface to a 3D printer heated bed.
Its narrow design occupies little space around the edge of the build surface and can be fitted or removed without screws. Clamping pressure is provided by the elastici..
0.75€
Ex Tax:0.62€
Stock: In Stock
Model: Aislante-Térmico-PET
Flexible thermal insulation designed for installation underneath a 3D printer heated bed. Its three-layer construction helps reduce downward heat loss, contributing to more efficient heating and improved temperature stability.
This is a passive component: it requires no electrical power and may b..
1.19€
Ex Tax:0.98€
Showing 1 to 11 of 11 (1 Pages)