Menu
Your Cart

Components

Stock: In Stock Model: Rod-D10
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
2.70€ Ex Tax:2.23€
Stock: In Stock Model: Rod-D12
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
4.95€ Ex Tax:4.09€
Stock: In Stock Model: Rod-D8
Material: Stainless steel 304 Quality: H9 Precision cutting: cutting is done by hand, so the measure may be slightly higher, but will never be less than indicated. Edges: The edges are delivered conveniently filed down. Straightness: the maximum allowed deviation is 1mm/m in rods..
1.90€ Ex Tax:1.57€
Stock: In Stock Model: LeadScrew-T8x8
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. You can choose the type of nut. Steps per mm: 800 (using 1/32 drivers) Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 8mm 1 Piece ..
3.75€ Ex Tax:3.10€
Stock: In Stock Model: LeadScrew-T8x2
Lead screw 8mm diameter is used for the movement of the Z axis in 3D printers. Nominal dimensions: Diameter: 8mm Length: as option Thread pitch: 2mm 1 Piece ..
3.85€ Ex Tax:3.18€
Stock: In Stock Model: fleje-templado-0,5mm
Usage:It is possible to print directly on it, but we recommend to use the antiwarping adhesive film for a better performance. Before gluing this film, wipe it with a cloth to remove any stains and make sure that the film sticks correctly.If you only use lacquer on the upper side, the result will be ..
2.95€ Ex Tax:2.44€
Stock: In Stock Model: HTA3D-DUAL-EXTRUDER
Based on: https://www.thingiverse.com/thing:2228901 Extruder kit content (configurable):Hotend Chimera style. Equipped with fan 3010,2x 40w heating cartridges, 2x NTC 100kΩ thermistors, Teflon tube and 4 BSP connectors PC04-1 2x Motors Nema 17 - length 40mm - with 1..
95.00€ 73.50€ Ex Tax:60.74€
Stock: In Stock Model: Fusible-1808FastBlow
Fast blow fuse, to choose from 10A, 15A or 20A.1 unit ..
0.55€ Ex Tax:0.45€
Stock: In Stock Model: 1225B-BallBearing-24V
Ball bearing fan 12025 for 24V, large size that allows to generate a large air flow.Ball bearing fans are designed to improve on conventional fans, they are less prone to wear and can run at higher temperatures.Fan Specifications 12025:Size: 120x120x25 mm  Certification: ce, RoHSFan Life: ..
5.99€ Ex Tax:4.95€
Stock: In Stock Model: 12025-Hydraulic-24V
Hydraulic bearing fan 12025 for 24V, large size that allows to generate a large air flow.Fan Specifications 1225:Size: 120x120x25 mm  Certification: ce, RoHSFan Life: 40000 HrsNominal current: 0.12A ± 10%Noise: 32 dBAHydraulicPower Interface: 2Pin XH2.54Air Volume: 77CFMAire Pressure: 0.10..
3.50€ Ex Tax:2.89€
12032 Ball Bearing Blower Fan 120x120x32 mm - 24V - 30 cm wire 12032 Ball Bearing Blower Fan 120x120x32 mm - 24V - 30 cm wire
Out of Stock
Stock: Out of Stock Model: 12032Blower-BallBearing-24V
Ball bearing centrifugal fan 12032 for 24V, large size that allows to generate a large air flow.Ball bearing fans are designed to improve on conventional fans, they are less prone to wear and can run at higher temperatures.Fan Specifications 12032:Size: 120x120x32 mm  Certification: ce, Ro..
11.99€ Ex Tax:9.91€
Stock: In Stock Model: 12032Blower-Sleeve-24V
Centrifugal fan 12032 for 24V, large size that allows to generate a large air flow.Fan Specifications 12032:Size: 120x120x32 mm  Certification: ce, RoHSFan Life: 50000 HrsNominal current: 0.5A ± 10%Noise: 49.6dBASleevePower Interface: 2Pin XH2.54Air Volume: 32.6CFMFan Speed: 3000RPMPower 1..
9.59€ Ex Tax:7.93€
Showing 1 to 12 of 577 (49 Pages)