Stock: In Stock
Model: 17HS2408
The 17HS2408 is an especially compact bipolar NEMA 17 stepper motor. It combines a 28 mm body, a round 5 mm shaft and an approximate weight of only 150 g. Its reduced size and inertia suit light mechanisms, feeders, small axes and projects where space or moving mass matter more than the torque of a ..
8.10€
Ex Tax:6.69€
Out of Stock
Stock: Out of Stock
Model: 17HS3401
The 17HS3401 is a compact NEMA 17 stepper motor with a 34 mm body, 5 mm D-shaped shaft and 1.8° step angle. Its rated minimum holding torque is 28 N·cm. It can suit light or space-constrained mechanisms, including small belt axes, plotters, laser engravers and some moving extruders, provided the ava..
8.25€
Ex Tax:6.82€
Stock: In Stock
Model: 17HS4401s-T8x8-300MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 300 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
23.99€
Ex Tax:19.83€
Stock: In Stock
Model: 17HS4401s-T8x8-310MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 310 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
23.99€
Ex Tax:19.83€
Stock: In Stock
Model: 17HS4401s-T8x8-350MM
NEMA 17 17HS4401S bipolar stepper motor with an integrated 350 mm TR8×8 trapezoidal lead screw. It is intended for direct linear motion in Z axes, actuators and DIY machines without a coupling between the motor and the lead screw.
The lead screw forms part of the motor shaft, simplifying the asse..
25.00€
Ex Tax:20.66€
Stock: In Stock
Model: 17HS4401S-PG518
The 17HS4401S-PG518 combines a 1.8° bipolar NEMA 17 stepper motor with a single-stage planetary gearbox whose exact ratio is 57:11, or approximately 5.18:1. It is intended for mechanisms requiring more low-speed torque and resolution than a direct-drive NEMA 17.
The reduction converts the motor's..
34.99€
Ex Tax:28.92€
Stock: In Stock
Model: 17HS6401
The 17HS6401 is a bipolar NEMA 17 stepper motor with a long 42 × 60mm body, a 1.8° step angle and a minimum 72N·cm holding torque. It provides a high torque margin within the NEMA 17 frame for axes, beds, lead screws and mechanisms where the motor remains stationary and a shorter model may not provi..
16.60€
Ex Tax:13.72€
Stock: In Stock
Model: 17HS8401
The 17HS8401 is a bipolar NEMA 17 stepper motor with a long 42 × 48mm body, a 1.8° step angle and a minimum 52N·cm holding torque. It is intended for axes and mechanisms requiring more torque margin than a 40mm-long NEMA 17 while retaining the standard 42mm front interface.
Its front 5mm D-shaped..
12.25€
Ex Tax:10.12€
Stock: In Stock
Model: 17HS4401s-09
Bipolar hybrid 0.9° NEMA 17 stepper motor, reference 42HS40-0.9 / 17HS4401S-09, with a 40 mm body and a 5 mm front D shaft. Its 400 full steps per revolution provide greater nominal angular command resolution than a conventional 1.8° motor while retaining a compact format for 3D printers, CNC machin..
11.99€
Ex Tax:9.91€
Stock: In Stock
Model: 17hs8401S-09
Bipolar hybrid 0.9° NEMA 17 stepper motor, reference 42HS48-0.9 / 17HS8401S-09, with a 48 mm body and 5 mm D shaft. It provides 400 full steps per revolution and a declared minimum holding torque of 52 N·cm, offering a balanced combination for 3D-printer, CNC, laser, plotter and custom mechanism axe..
14.50€
Ex Tax:11.98€
Stock: In Stock
Model: 17HS6401s-09
Bipolar hybrid 0.9° NEMA 17 stepper motor, reference 42HS60-0.9 / 17HS6401S-09, with a 60 mm body, 5 mm D shaft and declared minimum holding torque of 72 N·cm. It is intended for mechanisms requiring higher static torque while retaining the NEMA 17 front interface.Its 400 full steps per revolution p..
22.30€
Ex Tax:18.43€
Stock: In Stock
Model: 17HS4401
Features:17HS4401: Compact and powerful, ideal for 3D printers in medium size, and also for small CNC machines and robotics in general. This one is the most used size. Each motor includes 1 meter of wire with dupont connector at its end. The shaft motor is D type, which eases the use of pu..
8.75€
Ex Tax:7.23€
Showing 1 to 12 of 12 (1 Pages)