Your shopping cart is empty!
3010 fan with Injection Moulded Fan Duct Fan Specifications 3010 Size: 30x30x10mm 7 blades Connector: pH Nominal Current: 0.08 ± 10% Amp Rated Voltage: cc: 12 V Noise: 24±10% dBA Fan Speed: 7000±10% RPM ..
4.49€ 3.20€ Ex Tax: 2.64€
Compatible with 1.75mm filament Material: Stainless Steel This model allows the teflon tube reach the nozzle This configuration allows printing with PLA and flexible filaments is much easier ..
12.99€ 5.50€ Ex Tax: 4.55€
Compatible with 1.75mm filament Material: Stainless Steel This model allows the teflon tube reach the throat This configuration allows printing with PLA and flexible filaments is much easier, allows printing at temperatures above 260 °C..
12.99€ 5.50€ Ex Tax: 4.55€
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6 and its variations. The area of contact with the workpiece is the ideal for accurate impressions and to use extrusion width multipliers (eg ..
3.99€ 1.35€ Ex Tax: 1.12€
These nozzles perform the function of extrusion of melted plastic in 3D printing process. They are compatible with our hotends and popular V5, V6 and its variations. The area of contact with the workpiece is the ideal for accurate impressions and to use extrusion width multipliers (eg ..
3.99€ 1.35€ Ex Tax: 1.12€
The v6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor in place. These design improvements improve the thermal response of the HotEnd and make thermistor assembly easier.This product also comes with the following fixings:1pc with M3x0.5x3 to clamp ther..
14.00€ 2.95€ Ex Tax: 2.44€
The v6 Heater Block has been upgraded to clamp both the heater cartridge and thermistor in place. These design improvements improve the thermal response of the HotEnd and make thermistor assembly easier.This product also comes with the following fixings:M3x0.5x4 socket dome screw..
12.00€ 1.65€ Ex Tax: 1.36€
This version is more compact than the version v5. The inner diameter is 4.2 mm, which allows to enter a teflon tube down the throat, thereby minimizing friction. Connections: Bottom M7 - Compatible with throats style v6 Top designed to connect to the connector PC04-1..
14.99€ 3.80€ Ex Tax: 3.14€
This version is more compact than the version v5. The inner diameter is 4.2 mm, which allows to enter a Teflon tube until the nozzle, thereby minimizing friction. Connections: Bottom M6 - Compatible with V6 and V5 Heater Block Top designed to connect to the co..
19.99€ 7.00€ Ex Tax: 5.79€
This version is more compact than the version v5. The inner diameter 4.2 mm, which allows you to enter a teflon tube down the throat, thereby minimizing friction. Connections: Bottom M6 - Compatible with V6 and V5 Heater Block Top designed to connect to the c..
19.99€ 7.00€ Ex Tax: 5.79€
Compatible with 1.75mm filament Material: Stainless steel This model has a very thin transition zone allows the creation of a highly effective thermal barrier ..
12.99€ 5.15€ Ex Tax: 4.26€
Compatible with 1.75mm filament Material: Stainless Steel This model allows the Teflon tube reaches the nozzle This configuration allows printing with PLA and flexible filaments much easier ..
12.99€ 5.15€ Ex Tax: 4.26€