Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain for organising, guiding and protecting wiring on moving axes in 3D printers, CNC machines and automated equipment. It has a nominal internal cross-section of 10 × 10mm and an approximate length of 1 metre.
This version offers more capacity than the 7 × 7mm size while retain..
6.65€
Ex Tax:5.50€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain with a nominal internal cross-section of 10 × 10mm and openable links. Each cover can be opened to insert, remove or reorganise wiring without feeding it through from one end.
This construction simplifies installation in 3D printers, CNC machines and equipment that is alrea..
7.50€
Ex Tax:6.20€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x15
Nylon cable drag chain with a nominal internal cross-section of 10 × 15mm, an approximate length of 1 metre and openable links. It offers more capacity than the 7 × 7 and 10 × 10mm variants for larger cable bundles.
Its covers can be opened individually, allowing wires with pre-fitted connectors ..
7.99€
Ex Tax:6.60€
Out of Stock
Stock: Out of Stock
Model: LCD-Cable-50cm
A 50 cm flat ribbon cable with ten conductors and 2 × 5 female IDC connectors, intended to connect RepRap LCD displays to controller boards or adapters that use matching EXP1 or EXP2 ports.
The flexible 28 AWG AWM 2651 ribbon keeps display wiring organised. Its red stripe identifies conductor 1 a..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado
100K NTC Beta 3950 thermistor for temperature measurement in hotends, heated beds and other compatible thermal control systems. It is supplied pre-wired with a 1 metre cable and a Dupont connector, making it suitable for replacement and new FDM 3D printer installations.
Features
Sensor type: NTC..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Termistor100K ohm NTC 3950 cableado-XH
Pre-wired 100K NTC Beta 3950 thermistor for temperature measurement in compatible hotends, heated beds and thermal control projects. It includes a 1 metre cable and a 2-pin XH connector.
Features
Type: NTC thermistor.
Nominal resistance: 100K at 25 °C.
Beta value: 3950.
Cable length: 1 m.
Co..
0.65€
Ex Tax:0.54€
Stock: In Stock
Model: Kapton10mm
Kapton-type polyimide adhesive tape measuring 10mm wide and 33 metres long, intended for electrical insulation, thermal protection and masking in 3D printing, electronics and BGA or SMD soldering and rework processes.
It consists of a polyimide film with a silicone adhesive. It withstands tempera..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: 12AWG-negro-1m
Black 12 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making power connections in 3D printers, CNC machines, electronics, robotics and other DC projects.
The stranded conductor and flexible insulation mak..
1.60€
Ex Tax:1.32€
Stock: In Stock
Model: Cable-12AWG-70cm-01
Pair of flexible 12 AWG wires, one red and one black, prepared for making power connections between a DC power supply and the controller board of a 3D printer, CNC machine or another electronic project.
Each conductor is approximately 70cm long and uses stranded tinned copper with flexible silico..
2.25€
Ex Tax:1.86€
Stock: In Stock
Model: 12AWG-rojo-1m
Red 12 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length and is suitable for power connections in 3D printers, CNC machines, electronics, robotics and other DC projects.
Its stranded construction and flexible insu..
1.60€
Ex Tax:1.32€
Stock: In Stock
Model: Resistencia 12V 40W TN2F
This 12 V 40 W heater cartridge is designed to heat the heater block of FDM 3D printer hotends. Its power output provides fast heat-up times and stable temperature control, making it compatible with a wide range of hotends that use standard heater cartridges.
Its metal construction and high-tempe..
0.95€
Ex Tax:0.79€
New
Stock: In Stock
Model: 12V 5A Adapter
External power adapter for LED lighting, displays, cameras, controllers and other equipment operating at 12 V DC. It can provide up to 5 A and 60 W nominal and accepts a wide-range 100-240 V AC, 50/60 Hz mains input.
Its enclosed housing, detachable IEC input and included European mains lead prov..
7.25€
Ex Tax:5.99€