Stock: In Stock
Model: Thermal-paste-6g
This high thermal conductivity thermal paste improves heat transfer between two metal surfaces by reducing thermal resistance at the interface. It is particularly suitable for all-metal hotends, where it is applied between the heatbreak and the heatsink to optimize heat dissipation.
This is the s..
0.25€
Ex Tax:0.21€
Stock: In Stock
Model: Fusible-1808FastBlow
1808-size fast-acting surface-mount fuse, available in 10 A, 15 A and 20 A versions. It can be used to repair boards and circuits requiring the same package, current rating and operating characteristic.
The 10 A and 15 A versions can replace the corresponding fuses on the BIGTREETECH SKR 2. Selec..
0.55€
Ex Tax:0.45€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain for organising, guiding and protecting wiring on moving axes in 3D printers, CNC machines and automated equipment. It has a nominal internal cross-section of 10 × 10mm and an approximate length of 1 metre.
This version offers more capacity than the 7 × 7mm size while retain..
6.65€
Ex Tax:5.50€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x10
Nylon cable drag chain with a nominal internal cross-section of 10 × 10mm and openable links. Each cover can be opened to insert, remove or reorganise wiring without feeding it through from one end.
This construction simplifies installation in 3D printers, CNC machines and equipment that is alrea..
7.50€
Ex Tax:6.20€
Out of Stock
Stock: Out of Stock
Model: CadenaPortacables10x15
Nylon cable drag chain with a nominal internal cross-section of 10 × 15mm, an approximate length of 1 metre and openable links. It offers more capacity than the 7 × 7 and 10 × 10mm variants for larger cable bundles.
Its covers can be opened individually, allowing wires with pre-fitted connectors ..
7.99€
Ex Tax:6.60€
Out of Stock
Stock: Out of Stock
Model: LCD-Cable-50cm
A 50 cm flat ribbon cable with ten conductors and 2 × 5 female IDC connectors, intended to connect RepRap LCD displays to controller boards or adapters that use matching EXP1 or EXP2 ports.
The flexible 28 AWG AWM 2651 ribbon keeps display wiring organised. Its red stripe identifies conductor 1 a..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Kapton10mm
Kapton-type polyimide adhesive tape measuring 10mm wide and 33 metres long, intended for electrical insulation, thermal protection and masking in 3D printing, electronics and BGA or SMD soldering and rework processes.
It consists of a polyimide film with a silicone adhesive. It withstands tempera..
1.50€
Ex Tax:1.24€
Stock: In Stock
Model: 12AWG-negro-1m
Black 12 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length for making power connections in 3D printers, CNC machines, electronics, robotics and other DC projects.
The stranded conductor and flexible insulation mak..
1.60€
Ex Tax:1.32€
Stock: In Stock
Model: 12AWG-rojo-1m
Red 12 AWG flexible electrical wire made with a stranded tinned-copper conductor and silicone insulation. It is supplied in a 1-metre length and is suitable for power connections in 3D printers, CNC machines, electronics, robotics and other DC projects.
Its stranded construction and flexible insu..
1.60€
Ex Tax:1.32€
New
Stock: In Stock
Model: 12V 5A Adapter
External power adapter for LED lighting, displays, cameras, controllers and other equipment operating at 12 V DC. It can provide up to 5 A and 60 W nominal and accepts a wide-range 100-240 V AC, 50/60 Hz mains input.
Its enclosed housing, detachable IEC input and included European mains lead prov..
7.25€
Ex Tax:5.99€
Stock: In Stock
Model: Fusible125ºC
One-shot flat thermal fuse designed to open the circuit when its body reaches approximately 125°C. It includes two insulated leads and a mounting hole to position it close to the component or surface being monitored.
Its marking indicates maximum ratings of 250 V and 15 A. It is an overtemperatur..
0.99€
Ex Tax:0.82€
Stock: In Stock
Model: Kapton15mm
Made from polyimide with a silicone adhesive, this 15 mm BGA Kapton tape is designed to provide electrical insulation and thermal protection in high-temperature applications. It is widely used in 3D printing, electronics assembly and soldering or rework operations.
With a maximum operating temper..
2.10€
Ex Tax:1.74€