Stock: In Stock
Model: Boquilla-0.4-integrada
Integrated 0.4 mm nozzle and heatbreak for Creality printers fitted with the Unicorn-format hotend. Its 65.4 mm geometry matches the system used on K1C, Ender-3 V3 and Ender-3 V3 Plus machines, as well as selected K1 and K1 Max revisions already equipped with an integrated nozzle.
This is a compa..
8.25€
Ex Tax:6.82€
Stock: In Stock
Model: Kit-ceramico-K1
60 W ceramic hotend kit for replacing the heating and melt-zone assembly on Creality K1 and K1 Max printers fitted with the matching earlier-generation geometry and connectors. It includes the surround heater, thermistor, 0.4 mm nozzle, silicone sock, heatsink and mounting parts.
Check the revision..
11.60€
Ex Tax:9.59€
Stock: In Stock
Model: Dual-All-Metal-Throat
This stainless-steel all-metal heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. It is suitable for 1.75 mm filament and keeps the PTFE tube away from the hottest area of the assembly.
Because the PTFE tube does not exte..
3.99€
Ex Tax:3.30€
Out of Stock
Stock: Out of Stock
Model: Kit-Bloque-Kobra3
Replacement assembly for the hotend fitted to the Anycubic Kobra 3 and Kobra 3 Combo. It is supplied assembled with a heater block, heater cartridge, thermistor, bimetal heatbreak, 0.4 mm Brass nozzle and silicone sock.
It is intended to connect to the original Kobra 3 printhead. It should not be..
12.70€
Ex Tax:10.50€
Stock: In Stock
Model: Dual-4.1-Throat
This stainless-steel heatbreak is designed for dual hotends using a 7 mm smooth mounting section and an M6 threaded connection to the heater block. Its 4.1 mm internal bore allows a 4 mm PTFE tube to reach the nozzle and is intended for 1.75 mm filament.
The PTFE tube guides the filament along th..
3.99€
Ex Tax:3.30€
Stock: In Stock
Model: Bimetal-M6-D7
Bimetal all-metal heatbreak for dual V6-style hotends, with an M6 × 1 thread for the heater block and a smooth Ø6.95mm upper body for retention in a heatsink designed for nominal Ø7mm heatbreaks.
Its construction combines titanium in the thermal bridge with copper in the cold section. Titanium li..
3.20€
Ex Tax:2.64€
Stock: In Stock
Model: V6-Titanium-throat-Dual
Trianglelab Kraken all-metal heatbreak manufactured from titanium alloy for 1.75mm filament. It uses a smooth 7mm cold-side body and a hot-side M6 thread, a geometry intended for heatsinks that secure the heatbreak through a cylindrical bore and a separate lateral retention system.Trianglelab declar..
5.99€
Ex Tax:4.95€
Recommended
Stock: In Stock
Model: Throat-AM-Bimetal-M6-D7
Trianglelab all-metal bimetal heatbreak for dual V6-style hotends, with an M6 thread for the heater block and a smooth Ø7mm upper body for retention in a compatible heatsink. It is designed for 1.75mm filament.
It combines a polished stainless-steel centre tube with two copper-alloy sections. Thi..
15.35€
Ex Tax:12.69€
Recommended
Stock: In Stock
Model: Throat-AM-Bimetal-M6-M7
Trianglelab all-metal bimetal heatbreak for V6-style hotends, with an M6 thread for the heater block and an M7 thread for the heatsink. Its nominal length is 22mm and it is designed for 1.75mm filament.
Its three-piece construction combines a polished stainless-steel centre tube with copper-alloy..
15.75€
Ex Tax:13.02€
Stock: In Stock
Model: V6-Titanium-throat
All-metal titanium heatbreak for building or repairing V6-style hotends. It has an M7 × 1 thread for the heatsink, an M6 × 1 thread for the heater block and a 2mm bore for 1.75mm filament.As PTFE does not extend into the hot zone, it is suitable for all-metal assemblies. Titanium limits heat transfe..
5.56€
Ex Tax:4.60€
Stock: In Stock
Model: V6-Heatsink-with-all-metal-throat
This V6 heatsink features an integrated all-metal heatbreak and is designed for Bowden extrusion systems compatible with V5 and V6 hotends. Its compact design provides efficient heat dissipation while allowing the installation of a Bowden fitting for PTFE tubing.
Features
V6 heatsink wit..
2.90€
Ex Tax:2.40€
Stock: In Stock
Model: V6-Heatsink-with-4.2-throat
This V6 heatsink features an integrated PTFE-lined heatbreak, allowing the PTFE tube to extend down to the top of the nozzle. Designed for Bowden extrusion systems compatible with V5 and V6 hotends, it minimizes unsupported filament length for smoother and more reliable extrusion.
Features
..
2.90€
Ex Tax:2.40€