Stock: In Stock
Model: T 20-M3
M3 hammer T-nut for fastening components to 20 series aluminium profiles with a 6 mm slot. It can be inserted directly through the open slot, making it particularly useful when adding components to an already assembled frame.
Once inserted, the nut is turned approximately 90° so that its body sits ..
0.08€
Ex Tax:0.06€
Stock: In Stock
Model: T 30-M3
M3 hammer T-nut for creating fastening points in 30 series aluminium profiles with an 8 mm slot. It can be inserted directly through the open slot, allowing brackets, sensors, electronics and other accessories to be added to an already assembled frame.
After insertion, the nut is turned approximate..
0.09€
Ex Tax:0.07€
Stock: In Stock
Model: Tuerca ranura 30-M3
Description
Nickel-plated carbon-steel M3 sliding nut for HTA3D European 30-series profiles with a nominal 8 mm slot. It is inserted through an open end and moved to the required mounting position.
The M3 thread is suitable for sensors, electronics and small brackets on structures built from 3030 ..
0.15€
Ex Tax:0.12€
Out of Stock
Stock: Out of Stock
Model: Tuerca ranura 15-M3
Description
M3 threaded sliding nut for HTA3D 15-series structural profiles. It is inserted longitudinally through an open end of the profile and can be moved along the slot to the required position.
Its aluminium body provides a compact mounting point for sensors, brackets, electronics and other ..
0.16€
Ex Tax:0.13€
Stock: In Stock
Model: T 20-M4
M4 hammer T-nut for fastening components to 20 series aluminium profiles with a 6 mm slot. It can be inserted directly through the open slot, allowing accessories to be added or repositioned without accessing the ends of the frame.
After insertion, the nut is turned approximately 90° so that its bo..
0.08€
Ex Tax:0.06€
Stock: In Stock
Model: T 30-M4
M4 hammer T-nut for fastening components to 30 series aluminium profiles with an 8 mm slot. Its shape allows it to be inserted directly through the open slot, making modifications and extensions easier on already assembled frames.
After insertion, the nut is turned approximately 90° to position its..
0.09€
Ex Tax:0.07€
Stock: In Stock
Model: Tuerca ranura 20-M4
Description
Nickel-plated carbon-steel M4 sliding nut for HTA3D European 20-series profiles. It is inserted through an open end and provides an adjustable mounting point along the slot.
Suitable for brackets, plates, supports and accessories using M4 fasteners on structures built from 2020 or 2040..
0.12€
Ex Tax:0.10€
Stock: In Stock
Model: Tuerca ranura 30-M4
Description
Nickel-plated carbon-steel M4 sliding nut for HTA3D European 30-series profiles. It is inserted through the profile end and provides an adjustable mounting point inside the slot.
Key features
Family: European 30-series profile.
Nominal slot: 8 mm.
Thread: M4.
Material: nickel-p..
0.15€
Ex Tax:0.12€
Out of Stock
Stock: Out of Stock
Model: Tuerca ranura 15-M4
Description
Aluminium M4 sliding nut for HTA3D 15-series structural profiles. It is inserted through an open end and moved longitudinally along the slot to the required mounting position.
The M4 thread can be used to secure brackets, plates, supports and other components using this fastener size.
..
0.16€
Ex Tax:0.13€
Stock: In Stock
Model: T 20-M5
M5 hammer T-nut for fastening brackets, mounts and other accessories to 20 series aluminium profiles with a 6 mm slot. It can be inserted directly through the open slot, allowing components to be added to an assembled frame without accessing the ends of the profile.
Once inside the slot, the nut is..
0.08€
Ex Tax:0.06€
Stock: In Stock
Model: T 30-M5
M5 hammer T-nut for fastening brackets, mounts and accessories to 30 series aluminium profiles with an 8 mm slot. It can be inserted directly through the open slot, allowing components to be added or repositioned without dismantling the ends of the frame.
Once inserted, the nut is turned approximat..
0.08€
Ex Tax:0.07€
Stock: In Stock
Model: Tuerca ranura 20-M5
Description
Nickel-plated carbon-steel M5 sliding nut for HTA3D European 20-series profiles with a nominal 6 mm slot. It is inserted through an open end and can be adjusted longitudinally before tightening the joint.
The M5 thread is commonly used by structural brackets and connectors for 2020 and..
0.12€
Ex Tax:0.10€